System information

BSR 64000 Configuration and Management Guide
10-6
metric <n> is the redistribution metric number for static routes.
metric-type 1 redistributes OSPF External Type 1 metrics.
metric-type 2 redistributes OSPF External Type 2 metrics.
route-map <map-name> is the route-map name for the static route.
subnets allows the consideration of subnets for redistribution into IS-IS.
tag sets a tag for routes redistributed into IS-IS.
cr is a command return that redistributes of all static routes.
Assigning a Default Metric Value for Redistributed Routes
The default metric function is used to eliminate the need for separate metric
definitions for each routing protocol redistribution.
Follow these steps to assign a default metric value for all routes redistributed into
IS-IS:
1. Use the router isis command to enter the IS-IS routing process in Global
Configuration mode, as shown below:
MOT(config)#router isis
2. Use the default-metric command in Router Configuration mode to force a
routing protocol to use the same metric value for all distributed routes from other
routing protocols, as shown below:
MOT(config-isis)#default-metric <n>
where:
n is the default metric value for all routes that are redistributed into ISIS.
Managing IS-IS on the BSR
The following sections are used to manage IS-IS on the BSR:
• Specifying Router-Level Support
• Forcing a Default Route or Route Map into an IS-IS Domain