System information

BSR 64000 Configuration and Management Guide
2-8
Figure 2-1 CLI Command Flow Chart
Disabling and Resetting Features
Use the no form of a command to disable a feature. Use the command without the
keyword no to re-enable a disabled feature or to enable a feature that is disabled by
default. For example, IP routing is enabled by default. To disable IP routing, use the
no ip routing command, and use ip routing to re-enable it.
Router Configuration Mode
MOT(config-<protocol name>)#
Route Map Configuration Mode
MOT(config-rmap)#
Cable Spectrum Group Mode
MOT(config-spcgrp:<group name>)#
Interface Configuration Mode
MOT(config-if)#
Ctrl Z
End
Global Configuration Mode
MOT(config)#
Ex it
Ctrl Z
MOT(config)#router <protocol name>
MOT(config)#route-map <name> permit/deny
MOT(config)#interface <interface type>
MOT(config)#cable spectrum-group <group name>
End
Ex it
User EXEC Mode
MOT>
Privileged EXEC Mode
MOT#
Ctrl Z
End
MOT>enable
Console or Telnet
Exit
Terminates
Connection
MOT#configure