System information

Using the Command Line Interface
2-7
Cable Spectrum Group Mode
The spectrum management system monitors the upstream signal integrity, and collects
upstream spectrum information. In Cable Spectrum Group Mode, you can configure a
spectrum group, apply a spectrum group to an upstream port, and evaluate spectrum
performance. From Global Configuration mode, enter Cable Spectrum Group mode
by entering any cable spectrum-group command. The prompt changes to
MOT(config-spcgrp:<group-name>)#. To exit Cable Spectrum Group mode
and return to Global Configuration mode, enter the exit command. To exit and return
to Privileged EXEC mode, use the end command or press Ctrl-Z.