System information

Configuring IP Multicast Routing
8-23
• Use the clear ip dvmrp prune * command in Privileged EXEC mode to clear all
dvmrp prunes, as shown below:
MOT#clear ip dvmrp prune *
• Use the clear ip dvmrp prune group command in Privileged EXEC mode to
clear prunes from a specific DVMRP group, as shown below:
MOT#clear ip dvmrp prune group <ip-address>
where:
ip-address is the IP address of the DVMRP group.
• Use the clear ip dvmrp prune neighbor command in Privileged EXEC mode to
clear prunes from a specific neighbor, as shown below:
MOT#clear ip dvmrp prune neighbor <ip-address>
where:
ip-address is the IP address of the DVMRP neighbor.
Removing a DVMRP Route
Use the following options to remove a DVMRP route:
• If you want to remove a specific DVMRP route, use the clear ip dvmrp route
command in Privileged EXEC mode, as shown below:
MOT#clear ip dvmrp route <ip-address>
where:
ip-address is the IP address of the DVMRP route.
• If you want to clear all DVMRP routes, use the clear ip dvmrp route * command
in Privileged EXEC mode, as shown below:
MOT#clear ip dvmrp route *
Clearing IGMP Statistics
Use the clear ip igmp counters command in Privileged EXEC mode to remove
IGMP statistics, as shown below: