System information

BSR 64000 Configuration and Management Guide
2-4
You begin a CLI session in User EXEC mode, which has a limited set of commands.
To access other commands, switch to Privileged EXEC mode. In Privileged EXEC
mode, you can enter any EXEC command or switch to Global Configuration mode.
Configuration changes that you make in EXEC mode remain in effect until you reboot
the system, unless you save your running configuration to your startup configuration.
Interface
Configuration
From Global
Configuration
mode, enter any
interface
command.
MOT(config-if)# To return to Global
Configuration mode,
enter the end or exit
command.
To return to Privileged
EXEC mode, press
Ctrl-Z.
Router
Configuration
From Global
Configuration
mode, enter any
router
command.
MOT(config-bgp)#
MOT(config-dvmrp)#
MOT(config-isis)#
MOT(config-ospf)#
MOT(config-rip)#
(The prompt is
protocol-dependent.)
To return to Global
Configuration mode,
enter the end or exit
command.
To return to Privileged
EXEC mode, press
Ctrl-Z.
Route Map
Configuration
From Global
Configuration
mode, enter any
route map
command.
MOT(config-rmap)# To return to Global
Configuration mode,
enter the end or exit
command.
To return to Privileged
EXEC mode, press
Ctrl-Z.
Cable
Spectrum
Group
From Global
Configuration
mode, enter any
cable
spectrum-grou
p command.
MOT(config-spcgrp:
<group-name>)#
To return to Global
Configuration mode,
enter the end or exit
command.
To return to Privileged
EXEC mode, press
Ctrl-Z.
Table 2-2 Command Mode Access, Prompt, and Exit Details
Mode Name Access Means Prompt Display Exit Means