System information

BSR 64000 Configuration and Management Guide
7-20
MOT# show ip bgp dampened-paths[<number>]
5. To display the configured community access list, use the show ip community-list
from Global Configuration mode, as shown below.
MOT(config)#show ip community-list [<number>]
where:
number is the access list number; valid entries are 1 to 199.
6. To display interface multicast information, use the show ip interface from EXEC
mode, as shown below.
MOT#show ip interface [<number>]
show ip interface [brief] [ethernet <slot> /<port> | cable <slot> /<port> |
pos <slot> /<port> | loopback <num:1,16> | tunnel <num:0,255>]
where:
brief indicates display a brief summary of IP status and configuration.
ethernet slot / port indicates the Ethernet interface slot and port numbers.
cable slot / port indicates the cable slot and port numbers.
pos num:0,255 indicates the Packet over SONET (POS) slot and port.
loopback num:1,16 indicates the loopback interface.
tunnel num:0,255 indicates the tunnel interface.
7. To display the routing table entries, use the show ip route from Privileged EXEC
or Global Configuration mode, as shown below.
MOT#show ip route [<hostname> | isis | bgp | connected | ospf | rip | static |
<prefix> [mask]]
where:
hostname is the DNS host name.
isis displays the Intermediate-system to Intermediate-system routing (IS-IS)
protocol routes.
bgp display BGP details.
connected displays connected routes.