System information

BSR 64000 Configuration and Management Guide
6-128
• The show cable modem maintenance command is used to veiw station
maintenance statistics, which includes station maintenance retries, station
maintenance failures, and recent event timestamps.
Cable modem (CM) station maintenance ranging, which occurs during the CM
registration process, uses periodic time intervals to send a unicast message
containing a registered SID between the cable modem and the CMTS.
Use the following options to display station maintenance statistics:
• Use the show cable modem maintenance command to view all station
maintenance statistics, as shown below:
MOT#show cable modem maintenance
• Use the show cable modem maintenance command to view station
maintenance statistics for CMs on a particular cable interface, as shown
below:
MOT#show cable modem <x>/<y> maintenance
where:
x is the cable module slot number.
y is the cable interface number, which is 0.
• Use the show cable modem maintenance command to view station
maintenance statistics for a particular CM, as shown below:
MOT#show cable modem <mac> maintenance
Figure 6-26 displays station maintance statistics for a CM. The following
example demonstrates that there have been no CM station maintance ranging
retries or failures:
Figure 6-26 show cable modem maintenance Command Output