System information

Configuring the CMTS
6-127
Figure 6-24 displays MAC layer statistics for a specific CM:
Figure 6-24 show cable modem mac Command Output
• The show cable modem phy command displays physical hardware information
for CMs.
Use the following options to view CM physical layer information:
• Use the show cable modem phy command to view physical layer
information for CMs on a specific cable module, as shown below:
MOT#show cable modem phy {<x>/<y>}
where:
x is the slot number of the cable module.
y is the cable interface number, which is 0.
• Use the show cable modem phy command to view physical layer
information for a specific CM, as shown below:
MOT#show cable modem <mac> phy
where:
mac is the CM MAC address.
Figure 6-25 displays Physical layer statistics for a specific CM:
Figure 6-25 show cable modem phy Command Output