System information

Configuring the CMTS
6-121
Figure 6-15 displays the cable modem cpe statistics for each cable interface:
Figure 6-15 show cable modem cpe Command Output
• To display information for a SID assigned to a CM on a specific DOCSIS
interface, use the show cable modem detail command in Privileged Exec mode,
as shown below:
MOT#show cable modem detail <x>/<y> <sid>
where:
x is the slot number of the cable module.
y is the cable interface number, which is 0, to which the CM is connected.
sid is the Service Identifier assigned to a CMs.
• Use the show cable modem detail command in Privileged Exec mode to display
information for a specific modem connected to a specific interface, as shown
below:
MOT#show cable modem detail [<mac> | <prefix>]
where:
mac is the CM MAC address.
prefix is the CM IP address.