System information

BSR 64000 Configuration and Management Guide
6-120
• Use the following options to view Customer Premises Equipment (CPE)
information:
• If you want to display CPE information for all cable interfaces, use the show
cable modem-cpe command as shown bellow:
MOT#show cable modem cpe
• If you want to display information for a CPE IP or MAC address, use the
show cable modem-cpe command, as shown below:
MOT#show cable modem cpe [<mac> | <prefix>]
where:
<mac> is the CPE MAC address.
<prefix> is the CPE IP address.
• If you want to display CPE information for a particular upstream port, use the
show cable modem-cpe upstream command, as shown below:
MOT#show cable modem cpe <x>/<y> upstream <NUM>
where:
x is the slot number of the cable module.
y is the cable interface number, which is 0.
NUM is the upstream port number.