System information

BSR 64000 Configuration and Management Guide
6-118
Use these options to view cable modem information:
• To display information for all CMs on connected to the BSR, use the show cable
modem command in Privileged EXEC mode:
MOT#show cable modem
• To display information for a specific CM connected to the BSR, use the show
cable modem command, as shown below:
MOT#show cable modem [<mac> | <prefix>]
where:
mac is the CM MAC address.
prefix is the CM IP address.
Figure 6-14 describes the show cable modem command output:
Figure 6-14 show cable modem Command Output
Connectivity State Describes the connectivity state of a cable
modem. Refer to Table 6-12 for more
information on each connectivity state.
Timing offset CM current timing adjustment.
Rec Power CM receive downstream power level in
dbmv.
IP address CM IP address
MAC address Media Access Control layer address
Table 6-11 Cable Modem Fields
Field Identification