System information

Configuring the CMTS
6-111
• To reset all CMs connected to the BSR, use the clear cable modem all reset
command in Privileged EXEC mode, as shown below:
MOT#clear cable modem all reset
Clearing Cable Interface Counters
To clear the counters for a cable interface, use the clear counters cable command in
any mode as shown below:
MOT#clear counters cable <x>/<y>
where:
x is the slot number of the cable module.
y is the cable interface number, which is 0.
Gathering DOCSIS Network Information
The following sections describe how to use show commands to gather network
information from the BSR:
• Displaying Cable Interface Statistics
• Displaying Downstream Parameters
• Displaying Upstream Parameters
• Viewing CM Information
• Displaying Modulation Profiles
• Displaying BPI Configuration Settings