System information

BSR 64000 Configuration and Management Guide
6-82
Figure 6-2 shows sample output for the show cable spectrum-group map command:
Figure 6-2 show cable spectrum-group map Command Output
To view the spectrum schedule for the spectrum group that you created, enter the
show cable spectrum-group schedule command in Global Configuration mode, as
shown below:
MOT(config)#show cable spectrum-group <WORD> schedule
where:
WORD is the spectrum group name.
Figure 6-3 shows sample output for the show cable spectrum-group schedule
command:
Figure 6-3 show cable spectrum-group schedule Command Output