System information

Configuring the CMTS
6-81
Figure 6-1 shows sample output for the show cable spectrum-group command:
Figure 6-1 show cable spectrum-group Command Output
To view the spectrum allocation map for the spectrum group that you created, enter
the show cable spectrum-group map command in Global Configuration mode, as
shown below:
MOT(config)#show cable spectrum-group <WORD> map
where:
WORD is the spectrum group name.
Note: In the show cable spectrum-group map command output, the
SPEC_OCCUPIED message that appears in the Map status column
indicates that this section of the upstream spectrum is occupied by the
upstream channel of the spectrum group. The SPEC_AVAILABLE message
indicates that the section of the upstream spectrum is free to use, and no
upstream channel is currently using this section of the upstream spectrum.