System information

BSR 64000 Configuration and Management Guide
6-76
5. Use the hop action band command in Cable Spectrum Group mode to determine
the hop for each frequency band during the frequency hop action, as shown
below:
MOT(config-spcgrp:<WORD>)#hop action band {<start frequency> <end
frequency>} [priority <1-255>]
where:
WORD is the spectrum group name.
start frequency is the start upstream frequency band from 5000000 to
42000000 Hz.
end frequency is the end upstream frequency band from 5000000 to
42000000 Hz.
1-255 is the priority number of the upstream band hop action. When no
priority is assigned, the default priority is 128.
For example, the following syntax determines that the upstream frequency band
of 20 MHz to 30 MHz replaces the existing upstream frequency band when the
hop action is triggered and defines the priority level of the hop:
MOT(config-spcgrp:spectrum1)#hop action band 20000000 30000000
priority 110