System information

Configuring the CMTS
6-67
Deleting an Existing Availability Time for a Band
If you need to delete the existing availability time for a band, use the no time band
command in Cable Spectrum Group mode, as shown below:
MOT(config-spcgrp:<WORD>)#no time {<day> | <hh:mm:ss>} band {<start
frequency> <end frequency>}
where:
WORD is the spectrum group name.
day is the three letter abbreviation for day of the week
hh:mm:ss is the time during the day when the band is removed.
start frequency is the start upstream frequency from 5000000 to 42000000
Hertz.
end frequency is the end upstream frequency from 5000000 to 42000000
Hertz.
Note: When deleting the time for a band, ensure that the exact day,
hh:mm:ss, and start and end upstream frequencies are used.