System information

BSR 64000 Configuration and Management Guide
6-66
3. If you want to schedule the time for when the spectrum group band becomes
available on a weekly basis, use the time band command in Cable Spectrum
Group mode, as shown below:
MOT(config-spcgrp:<WORD>)#time {<day> <hh:mm:ss>} band {<start
frequency> <end frequency>}
where:
WORD is the spectrum group name.
day is the three letter abbreviation for day of the week.
hh:mm:ss is the time during the day when the band becomes available.
start frequency is the start upstream frequency from 5000000 to 42000000
Hertz.
end frequency is the end upstream frequency from 5000000 to 42000000
Hertz.
The following example defines the 21 MHz to 29 MHz upstream frequency band
as being available every Thursday morning at 10:00 AM for spectrum group
spectrum1:
MOT(config-spcgrp:spectrum1)#time Thu 10:00:00 band 21000000
29000000