System information

Configuring the CMTS
6-65
2. If you want to schedule the time for when the spectrum group band becomes
available on a daily basis, use the time band command in Cable Spectrum Group
mode, as shown below:
MOT(config-spcgrp:<WORD>)#time <hh:mm:ss> band {<start
frequency> <end frequency>}
where:
WORD is the spectrum group name.
hh:mm:ss is the time of the day, which includes the hour, minute, and second
when the band becomes available.
start frequency is the start upstream frequency from 5000000 to 42000000
Hertz.
end frequency is the end upstream frequency from 5000000 to 42000000
Hertz.
For example:
The following example defines the 25 MHz to 35 MHz upstream frequency band
as being available daily at 4:00 PM for spectrum group spectrum1:
MOT(config-spcgrp:spectrum1)#time 16:00:00 band 25000000
35000000