System information

Configuring the CMTS
6-53
2. Use the cable privacy cm-auth grace-time command in Interface Configuration
mode to set an individual grace-time AK value, as shown below:
MOT(config-if)#cable privacy cm-auth grace-time <mac>
<300-3024000>
where:
mac is the CM MAC address.
300-3024000 is the individual grace-time AK, expressed in seconds (5
minutes to 35 days).
3. Use the cable privacy cm-auth reset command in Interface Configuration mode
to reset the individual CM life-time or grace-time value once a new AK life-time
or grace-time value is configured, as shown below:
MOT(config-if)#cable privacy cm-auth reset <mac>
where:
mac is the CM MAC address.
4. Use the show cable privacy cm-auth command in Interface Configuration mode
to display AK information for an individual CM using its MAC address, as shown
below:
MOT(config)#show cable privacy cm-auth <mac>
where:
mac is the CM MAC address.
5. Use the show cable privacy auth command to view Authorization Key (AK)
grace-time and life-time values in all modes except User EXEC mode, as shown
below:
MOT(config-if)#show cable privacy auth