System information

Configuring the CMTS
6-7
Follow these steps to configure and verify a static host authorization:
1. Enter Privileged EXEC mode.
2. Issue the host authorization cpe command in Privileged EXEC mode to create a
static entry for a specific CM and CPE in Privileged EXEC mode, as shown
below:
MOT#host authorization <mac> cpe <mac> <prefix>
where:
mac is the MAC address of the cable modem.
mac is the MAC address of the customer premises equipment (CPE).
prefix is the IP address of the CPE.
3. Use the show host authorization cpe command in Privileged EXEC mode to
display the static entries and DHCP lease query information for CPEs only, as
shown below:
MOT#show host authorization cpe
Deleting a Static Host Authorization Entry for a Specific CM
Use the no host authorization on cpe command to delete a host authorization entry
in Privileged EXEC mode, as shown below:
MOT#no host authorization <mac> cpe <mac> <prefix>
where:
mac is the MAC address of the cable modem.
mac is the MAC address of the customer premises equipment (CPE).
prefix is the IP address of the CPE.