System information

BSR 64000 Configuration and Management Guide
5-22
maxadvertinterval is the maximum time between advertisements.
number2 is the maximum interval between advertisements, expressed in
seconds; valid entries are 4 to 1800; default is 600.
minadvertinterval is the minimal time between advertisements, expressed
in seconds.
number3 is the minimum interval between advertisements, expressed in
seconds; valid entries are 3 to 1800; default is 450.
multicast indicates advertisements are sent with multicast.
preference indicates preference value for this interface.
number4 indicates preference; valid entries are -2147483648 to 2147483647;
default is 0.
Use the no ip irdp command to disable the function.
3. To change the duration of IRDP advertisement ages, use the ip irdp holdtime
command in Interface Configuration mode, as shown below:
MOT(config-if)#ip irdp holdtime <number>
where:
number is the IRDP advertisement ages value, expressed in seconds; valid
entries are 1 to 9000; default is 1800.
4. To change the maximum time between IRDP advertisements, use the ip irdp
maxadvertinterval command in Interface Configuration mode, as shown below:
MOT(config-if)#ip irdp maxadvertinterval <number>
where:
number is the maximum time between IRDP advertisements, expressed in
seconds; valid entries are 4 to 1800; default is 600.
5. To change the minimum time between IRDP advertisements, use the ip irdp
minadvertinterval command in Interface Configuration mode, as shown below:
MOT(config-if)#ip irdp minadvertinterval <number>
where: