System information

Configuring Interfaces and TCP/IP Features
5-19
x is the POS module slot number.
y is the POS interface number.
tunnel <n> is a tunnel interface number from 1 to 255.
distance is the administrative distance; default is 1.
tag specifies the match to control route-map redistribution.
1-4294967295 is the match value.
range <n> indicates an established static route; valid entries are 1 to 65536.
2. To set a default route, use the address 0.0.0.0 with the ip route command in
global Configuration mode, as shown in the example below:
MOT(config)#ip route 0.0.0.0 0.0.0.0 198.56.0.2
Use the no ip route command to remove a static route from the routing table.
Table 5-2 describes the dynamic routing protocols and their default distances.
Table 5-2 Route Sources and Administrative Distances
Route Source Default Distance
Enhanced IGRP external route 170
Enhanced IGRP summary route 5
External BGP 20
IGRP 100
IGRP external route 170
Internal BGP 200
Internal Enhanced IGRP 90
OSPF 110
RIP 120
Static route 1
Unknown 255