System information

BSR 64000 Configuration and Management Guide
xiv
Enabling RIP Authentication 9-38
Configuring Interpacket Delay 9-38
Configuring Timers 9-39
Example 9-40
Configuring a Passive Interface for RIP 9-40
Redistributing Routes into RIP 9-41
Assigning a Default Metric Value for Redistributed Routes 9-43
Gathering RIP Information 9-44
10 Configuring IS-IS
Overview 10-1
Enabling IS-IS 10-1
Redistributing Routes into IS-IS 10-4
Assigning a Default Metric Value for Redistributed Routes 10-6
Managing IS-IS on the BSR 10-6
Specifying Router-Level Support 10-7
Forcing a Default Route or Route Map into an IS-IS Domain 10-7
Configuring the Administrative Distance for IS-IS 10-8
Configuring IS-IS Area or Domain Passwords 10-8
Summarizing IP Address Ranges 10-9
Enabling the LSP Overload Bit 10-9
Configuring a Passive Interface for IS-IS 10-9
Configuring IS-IS on an Interface 10-10
Specifying the Interface Circuit Type of an IS-IS Interface 10-10
Configuring IS-IS Link-State Cost Metrics 10-11
Setting the Advertised Hello Interval 10-11
Specifying the Advertised Hello Multiplier 10-12
Setting the Advertised CSNP Interval 10-12
Setting the LSP Interval 10-13
Setting the LSP Retransmission Interval 10-14
Setting the LSP Retransmit Throttle Interval 10-14
Setting the Designated Router Priority 10-14
Assigning a Password to an IS-IS Interface 10-15
Gathering IS-IS Information 10-16