System information

Configuring SNMP
4-15
MOT(config)#snmp-server engineID {local <engine-id> | remote
<ip-address> [udp-port <port-num>] <engine-id>}
where:
engine-id is the local or remote SNMP Engine engineID.
ip-address is the remote SNMP Engine IP address.
port-num is the optional UDP port number.
2. To remove an Engine-ID for the local or remote SNMP entity, use the no
snmp-server engineID command as shown below:
MOT(config)#snmp-server engineID {local <engine-id> | remote
<ip-address> [udp-port <port-num>] <engine-id>}
where:
engine-id is the local or remote SNMP Server engineID.
ip-address is the remote SNMP Engine IP address.
Note: For specifying a local engineID, you need not specify the entire
24-character engineID if it contains trailing zeros. You can specify only the
portion of the engineID up to the trailing zeros.
Note: Upon shipment, the agent has a default engineID that is equal to the
chassis MAC address.
Note: A local SNMP Engine-ID must be configured to use SNMPv3.