System information

BSR 64000 Configuration and Management Guide
4-14
• Contact person
• System location
• Engine identifier
Configuring System Contact Information
Establish a system contact string using the snmp-server contact command in Global
Configuration mode, as shown below:
MOT(config)#snmp-server contact <text>
where:
text is the system contact name.
Configuring System Location Information
Set the system location string using the snmp-server location command in Global
Configuration mode, as shown below:
MOT(config)#snmp-server location <text>
where:
text is the location of the system on the network.
Configuring the EngineID
1. Use the snmp-server engineID command in Global Configuration mode to
configure the Engine-ID for the local or remote SNMP entity, as shown below.
An SNMP entity can be an agent or management station.