System information

Configuring SNMP

4-1

Overview

This chapter describes the commands used to configure SNMP for managing the

BSR 64000

system and monitoring the network using its command line interface.

For further information on the CLI commands described in this chapter, refer to the

BSR Command Reference Guide. Configuring SNMP for the BSR involves the

following tasks:

• Configuring SNMP Server Parameters

• Enabling SNMP

• Configuring SNMP Server Identification

• Configuring SNMP Access Levels

• Configuring SNMP Traps

• Monitoring SNMP

Configuring SNMP Server Parameters

To configure SNMP Agent operations, you use a series of snmp-server commands.

To issue snmp-server commands, do the following:

1. Enter Global Configuration mode.

MOT#configure