Network Router User Manual

Release 1.0 CMTS Commands
526363-001-00 Rev. B MGBI 11-111
cable utilization-interval
The cable utilization-interval command specifies the upstream or downstream
channel utilization calculation interval. The no cable utilization-interval returns the
channel utilization calculation interval to the default value of "0" (disabled).
Group Access
MSO
Command Mode
Global Configuration
Command Line Usage
cable utilization-interval <0-86400>
no cable utilization-interval <0-86400>
Command Syntax
Command Default
0 = disabled
0-86400 the channel utilization interval in seconds, 0
is disabled