Network Router User Manual

BSR 2000 Command Reference Guide Release 1.0
11-110 MGBI 526363-001-00 Rev. B
cable upstream trap-enable-rdn
The cable upstream trap-enable-rdn command enables the
rdnCardIfLinkUpDownEnable trap for an upstream port. The
rdnCardIfLinkUpDownEnable trap indicates whether a link up or link down trap
should be generated. The no cable upstream trap-enable-rdn command disables the
rdnCardIfLinkUpDownEnable trap.
Group Access
All
Command Mode
Interface Configuration (cable interface only)
Command Line Usage
cable upstream <NUM> trap-enable-rdn
no cable upstream <NUM> trap-enable-rdn
Command Syntax
Command Default
Disabled
NUM Upstream port number.