Network Router User Manual

BSR 2000 Command Reference Guide Release 1.0
11-72 MGBI 526363-001-00 Rev. B
cable upstream channel-type
The cable upstream channel-type command allows you to specify the channel type
for the default upstream channel (0) or specify the channel type for up to four logical
channels (0-3).
Group Access
MSO
Command Mode
Interface Configuration (cable interface only)
Command Line Usage
cable upstream {<NUM> | <X/Y>} channel-type {tdma | atdma | mtdma | scdma}
no cable upstream {<NUM> | <X/Y>} channel-type {tdma | atdma | mtdma |
scdma}
Command Syntax
NUM the upstream port (default channel number =
0)
X/Y the upstream port number and logical channel
number (0-3)
tdma
atdma
mtdma
scdma
DOCSIS 1.0 or 1.1 channel type
DOCSIS 2.0 channel type
DOCSIS 1.0, 1.1, 2.0 TDMA channel type
DOCSIS 2.0 channel type only used for
logical channel configurations