Network Router User Manual

Release 1.0 System Administration Commands
526363-001-00 Rev. B MGBI 1-25
clear evt
The clear evt command resets the event count to "0" for all groups, a specified group,
or specified events.
Group Access
All
Command Mode
All modes except User EXEC
Command Line Usage
clear evt [<NUM> | <WORD>] [<range>]
Command Syntax
NUM this is always 0 for the BSR 2000
WORD the name of an EVT group - refer to Table 1-2
range specific EVTs in the specified EVT group
such as '1+5+8-13'. An asterisk "*" displays
all EVTs (including EVTs with a count of
"0") for a specific EVT group or individual
EVT.