Network Router User Manual

BSR 2000 Command Reference Guide Release 1.0
9-8 MGBI 526363-001-00 Rev. B
ip igmp static-group
The ip igmp static-group command connects, or configures, the router as a member
of a particular group on the interface. The no ip igmp static-group disassociates the
router from the group.
The ip igmp static-group command is used to give a host (that does not run IGMP)
membership in a multicast group.
Group Access
ISP
Command Mode
Interface Configuration
Command Line Usage
ip igmp static-group <A.B.C.D>
no ip igmp static-group <A.B.C.D>
Command Syntax
Command Default
Disabled
A.B.C.D IP multicast group address that the router is
configured to be a member of