Network Router User Manual

BSR 2000 Command Reference Guide Release 1.0
6-34 MGBI 526363-001-00 Rev. B
set origin
The set origin command configures the conditions for redistributing routes from any
protocol to any protocol. The no set origin command deletes the BGP origin code.
When the set origin command configures redistributing routes from any protocol to
any protocol, any match clause is necessary which includes pointing to a “permit
everything” to set tags.
Group Access
ISP
Command Mode
Route-map Configuration
Command Line Usage
set origin {egp | igp | incomplete}
no set origin {egp | igp | incomplete}
Command Syntax
egp EGP
igp remote IGP
incomplete unknown history