Network Router User Manual

Release 1.0 Routing Policy Commands
526363-001-00 Rev. B MGBI 6-33
set metric-type
The set metric-type command sets the metric type for the destination routing
protocol. The no set metric-type command disables the metric type set for the
destination routing protocol.
Use the route-map command to set the type of metric for the route imported by OSPF
into its domain.
Group Access
ISP
Command Mode
Route Map Configuration
Command Line Usage
set metric-type {external | internal | type-1 | type-2}
no set metric-type {external | internal | type-1 | type-2}
Command Syntax
Command Default
Disabled
external IS-IS external metric
internal use IGP metric as the MED for BGP
type-1 OSPF external type 1 metric
type-2 OSPF external type 2 metric