Network Router User Manual

Release 1.0 Routing Policy Commands
526363-001-00 Rev. B MGBI 6-13
match route-type external
The match route-type external command is used to match the type of OSPF routes.
The no match route-type external clears the match condition.
Group Access
ISP
Command Mode
Route-map Configuration
Command Line Usage
match route-type external [level-1 | level-2 | type-1 | type-2]
no match route-type external [level-1 | level-2 | type-1 | type-2]
Command Syntax
type 1 matches only type 1 external route (OSPF)
type 2 matches only type 2 external route (OSPF)
level-1 IS-IS level-1 route
level-2 IS-IS level-2 route