Network Router User Manual

BSR 2000 Command Reference Guide Release 1.0
4-34 MGBI 526363-001-00 Rev. B
debug ip udp
The debug ip udp command displays UDP-based transactions.The debug output
shows whether packets are being received from the host. The no debug ip udp
command turns off UDP debugging.
Group Access
All
Command Mode
All modes except User EXEC
Command Line Usage
debug ip udp [dhcp [<mac>]]
no debug ip udp [dhcp [<mac>]]
Command Syntax
Command Default
Disabled
dhcp display Dynamic Host Configuration Protocol
(DHCP) packet information
mac client hardware/MAC address in the form of
xxxx.xxxx.xxxx