Network Router User Manual

BSR 2000 Command Reference Guide Release 1.0
3-44 MGBI 526363-001-00 Rev. B
snmp-server trap rate-limit
The snmp-server trap rate-limit command constricts the rate of SNMP messages
and log messages sent to a remote host and used by the agent to send an unsolicited
notification to one or more pre-configured management stations. The no snmp-server
trap rate-limit clears the SNMP agent and increases the number of traps sent to a
remote host.
Group Access
System Administrator
Command Mode
Global Configuration
Command Line Usage
snmp-server trap rate-limit <0-2147483647> <0-2147483647>
no snmp-server trap rate-limit <0-2147483647> <0-2147483647>
Command Syntax
0-2147483647 number of SNMP traps; affects both trap and
SYSLOG
0-2147483647 per unit time in seconds