Network Router User Manual

Release 1.0 SNMP Commands
526363-001-00 Rev. B MGBI 3-7
snmp-server access
The snmp-server access command defines access policy information. The no
snmp-server access command clears the SNMP access policies..
Group Access
System Administrator
Command Mode
Global Configuration
Command Line Usage
snmp-server access <WORD> {v1 | v2c | v3 {noauth | auth | priv }} [notify
<WORD>] [match {exact | prefix} | prefix <WORD>] [read <WORD> [notify |
write]] [write <WORD> [notify]]
no snmp-server access <WORD> {v1 | v2c | v3 {noauth | auth | priv }} [prefix
<WORD>]
Command Syntax
Note: Community Name Access Method is used predominantly with SNMP
v1 and v2c.
WORD SNMP group name
v1 access group using v1 security model
v2c access group using v2c security model
v3 access group using v3 security model (USM)
noauth no authentication
auth authentication
priv privacy