Network Router User Manual

Release 1.0 IP Commands
526363-001-00 Rev. B MGBI 2-47
show host authorization cpe
The show host authorization cpe command is used to display the dynamic or static
ARP entries for CPEs only. The following screen output is displayed:
Group Access
All
Command Mode
All modes except User EXEC
Command Line Usage
show host authorization cpe {leased | static} [ | {begin | exclude | include}
{<WORD>} [ | {count | count-only}]]
show host authorization cpe {leased | static} [ | {count | count-only}]
Command Syntax
leased display dynamically configured host
authorization entries
static display statically configured host
authorization entries
| turns on output modifiers (filters)
begin filter for output that begins with the
specified string
exclude filter for output that excludes the
specified string
include filter for output that includes the
specified string
Type Host IP Address Host MAC Address
Dynamic 150.31.43.3 0008.0e72.bf72
Dynamic 150.31.43.2 0008.0e73.1dbc