Network Router User Manual

Release 1.0 System Administration Commands
526363-001-00 Rev. B MGBI 1-131
show process cpu
The show process cpu command displays detailed CPU usage statistics for the BSR
2000. The module type (for example: 1x4 CMTS slot <NUM>) is displayed along
with the CPU usage statistics for that module. For HSIM modules, the module sub
type (for example: Sub Type: SMGE) is displayed.
Group Access
All
Command Mode
All modes except User EXEC
Command Line Usage
show process cpu [frequency <30-200> | restart | stop] [ | {begin | exclude |
include} {<WORD>} [ | {count | count-only}]]
show process cpu [frequency <30-200> | restart | stop] [ | {count | count-only}]
Command Syntax
frequency 30-200 how many times per second a CPU statistic
measurement is taken in 30-200 Hz
restart restart the utilization measurement process on
the BSR 2000
stop stops the utilization measurement process
| turns on output modifiers (filters)
begin filter for output that begins with the specified
string
exclude filter for output that excludes the specified
string
include filter for output that includes the specified
string
WORD the specified string