Network Router User Manual

BSR 2000 Command Reference Guide Release 1.0
1-116 MGBI 526363-001-00 Rev. B
show log
The show log command displays message logging in the log file the newest message
first.The show log command displays log file contents and information about users
who have logged into the BSR. The following is an example of typical screen output
from the show log command:
Group Access
All
Preparing log file for reading ...
[02/11-10:39:08- 07:telnet01]-N-user enabled-user authenticated
[02/11-10:39:04- 07:telnet01]-N-connection made from 10.14.11.218 on session 01
[02/10-18:41:11- 07:RMs]-N-Module state RUNNING CMTS slot 1
[02/10-18:41:11- 07:RMs]-I-Slot 1 booted with version 2.1.0T00P39.KRBU
[02/10-18:41:09- 07:SPECMGR]-N-No shut down succeed for channel ifIndex = 98561
.
[02/10-18:41:09- 07:CRMTASK]-N-link up notification, ifIndex = 98561.
[02/10-18:41:08- 07:CRMTASK]-N-link up notification, ifIndex = 98305.
[02/10-18:41:08- 07:IM]-N-IP Interface cable 1/0 on 150.31.41.1 is up
[02/10-18:41:08- 07:IM]-N-Interface cable 1/0 is up
[02/10-18:41:07- 07:RMsc]-N-configuration change by [hotswapper]: cable downstre
am schedule priority-wfq
[02/10-18:41:07- 07:RMsc]-I-restoring: cable downstream schedule priority-wfq
[02/10-18:41:07- 07:RMsc]-E-bad return value 0 from parse() in loadInterfaceConf
iguration(), for config line:' cable dynamic-service authorization-mode disable'
[02/10-18:41:07- 07:RMsc]-I-restoring: cable dynamic-service authorization-mode
disable
[02/10-18:41:07- 07:RMsc]-N-configuration change by [hotswapper]: cable upstream
3 shutdown
[02/10-18:41:07- 07:RMsc]-I-restoring: cable upstream 3 shutdown
[02/10-18:41:07- 07:RMsc]-N-configuration change by [hotswapper]: cable upstream
2 shutdown
[02/10-18:41:07- 07:RMsc]-I-restoring: cable upstream 2 shutdown
[02/10-18:41:07- 07:RMsc]-N-configuration change by [hotswapper]: cable upstream
1 shutdown
[02/10-18:41:07- 07:RMsc]-I-restoring: cable upstream 1 shutdown
[02/10-18:41:07- 07:RMsc]-N-configuration change by [hotswapper]: no cable upstr
eam 0 shutdown
[02/10-18:41:07- 07:RMsc]-I-restoring: no cable upstream 0 shutdown
[02/10-18:41:07- 07:RMsc]-N-configuration change by [hotswapper]: cable upstream