Network Router User Manual

Release 1.0 PacketCable Commands
526363-001-00 Rev. B MGBI 16-51
Group Access
All
Command Mode
All modes except User EXEC
Command Line Usage
show packet-cable gate [dqos | cops <0-3> | identifier <0x00000000-0xffffffff> |
modem <mac> | slot <NUM> | subscriber <A.B.C.D>]
Command Syntax
dqos specify all DQoS gates
cops 0-3 specify a COPS connection and COPS handle
to display
identifier
0x00000000-0xffffffff
Gate Identifier in hexadecimal notation to
display detailed information about the DQoS
or Multimedia gate.
modem mac specify a cable modem MAC address to
display
slot NUM This number is always 0 for the BSR 2000.
subscriber A.B.C.D specify a CPE (subscriber) IP address to
display