Network Router User Manual

BSR 2000 Command Reference Guide Release 1.0
1-64 MGBI 526363-001-00 Rev. B
logging console
The logging console command enables the sending of system logging messages to the
console. Additionally, the logging of messages displayed on the console terminal can
be limited to a specified severity level. Use the no logging console command to
disable console logging.
Group Access
All
Command Mode
Global Configuration
Command Line Usage
logging console [alerts | critical | debugging | emergencies | errors | informational
| notifications | warnings]
no [alerts | critical | debugging | emergencies | errors | informational |
notifications | warnings]
Command Syntax
Severity Levels and Descriptions
emergencies emergency conditions where the system is
unusable - reserved for vendor-specific, fatal
hardware or software errors that prevents
normal system operation and causes reporting
system to reboot (severity level = 0)
alert conditions where immediate action is needed
- a serious failure which causes the reporting
system to reboot but is not caused by
hardware or software malfunctioning
(severity level = 1)