User manual

72 6. Settings
Ring and Vibrate
To set your phone to ring and vibrate when you receive
phone calls or Call Alerts:
1. Press / > Multimedia > Ring Tones.
2. Make sure Vibrate All is set to Off.
3. Scroll through the list and select a ring tone.
4. Press / > Assign w/Vibe.
5. Select Phone Line 1 and/or Phone Line 2 and press
Done (left softkey).
This icon
/ appears on the display.
Silence All
The Silence All option allows you to mute all sounds
without turning your phone off.
To activate Silence All:
䊳 With the phone in standby mode press and hold
the volume key down until the ringer level is set
at 0. (The screen will display ,.)
To deactivate Silence All:
䊳 Press the volume key up repeatedly to select a
volume level.
To set your phone to vibrate instead of making a sound for
some features but not others:
1. Press / > Multimedia > Ring Tones.
2. Make sure Vibrate All is set to Off.
3. Select Vibrate from the list of ring tones.
4. Select the feature(s) to which to assign Vibrate and
press
Done (left softkey).
/
The phone vibrates then rings for all calls.
,
The ring volume is set to zero for all calls.
Note: You can also set 3D sound effects settings in the Ring
Tones menu (/ >
Multimedia > Ring Tones > 3D
Effect
) or when assigning a ring tone.
Note: To set ring options for Direct Connect calls, Group
Connect calls, and Talkgroup calls, see “Vibrate
Settings” on page 71.