User manual

8. Contacts 101
Contacts
Filtering Contacts Entries
You can set Contacts to display only entries containing
Direct Connect numbers, Groups, and Talkgroups.
䊳 Press / > Contacts > / > Filter > Show DC.
Select
Show All to display all Contacts entries.
Finding Speed Dial Numbers
䊳 Press / > Contacts, select an entry and select a
phone number. The speed dial number is listed
directly under the contact phone number.
Adding a Number to an Entry
1. Display a Contacts entry. (See “Viewing Contacts”
on page 100.)
2. Press Edit (left softkey) or / > Edit.
3. Highlight the number type field above an open
number and press the navigation key right or left to
select a number type.
4. Scroll down to the open field, enter the new
number or address and press r.
5. Press Save (left softkey) to save the new number.
– or –
To assign a speed dial number or Voice Name,
select
[Options] > Speed # or Voice Name.
Complete the process, press
Back (right softkey)
and then press
Save (left softkey) to save the entry.
Editing Entries
1. Press / > Contacts and highlight an entry.
2. Press Edit (left softkey) or / > Edit.
3. Follow the applicable instructions in “Creating
Contacts Entries” on page 98 to edit the entry.
Tip: To display the next or previous entry, scroll right or left.
Tip: When editing or adding to entries, make sure to press
Save (left softkey) to save the changes (you may have to
press
Back to display the Save option). If you press @
before pressing
Save, your changes will be discarded.