User Guide MOTOROLA BRUTETM i680 www.nextel.com ©2009 Sprint. SPRINT and the NEXTEL name and logo are trademarks of Sprint. Other marks are the property of their respective owners.
Motorola, Inc. Consumer Advocacy Office 600 North US Hwy 45 Libertyville, IL 60048 www.hellomoto.com Note: Do not ship your phone to the above address. If you need to return your phone for repairs, replacement or warranty service, please contact the Motorola Customer Support Center at: 1-800-453-0920 (United States) 1-877-483-2840 (TTY/TDD United States for hearing impaired) Product Support: www.motorola.
DECLARATION OF CONFORMITY FCC Notice to Users Per FCC CFR 47 Part 2 Section 2.1077(a) The following statement applies to all products that have received FCC approval. Applicable products bear the FCC logo, and/or an FCC ID in the format FCC-ID: IHDT56KD1 on the product label. Motorola has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment. See 47 CFR Sec. 15.21.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Nextel Direct Connect . . . . . . . . . . . . . . . . . . . . . Group Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . Nextel Direct Send . . . . . . . . . . . . . . . . . . . . . . . . Talkgroups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Call Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Direct Talk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5. Data Services . . . . . . . . . . . . . . . . . . . . . . . 66 Wireless Data Services . . . . . . . . . . . . . . . . . . . . 66 Downloading Content . . . . . . . . . . . . . . . . . . . . . 68 6. Recent Calls . . . . . . . . . . . . . . . . . . . . . . . . 92 About Recent Calls . . . . . . . . . . . . . . . . . . . . . . . Viewing Recent Calls . . . . . . . . . . . . . . . . . . . . . . Recent Calls Options . . . . . . . . . . . . . . . . . . . . . . Saving Items From Recent Calls . . . . . . . . . .
10. microSD Card . . . . . . . . . . . . . . . . . . . . . 121 S1. Important Safety Information . . . . . . . . 154 Using a microSD Card With Your Phone . . . . microSD Settings . . . . . . . . . . . . . . . . . . . . . . . . . microSD Folders . . . . . . . . . . . . . . . . . . . . . . . . . Connecting Your Phone to Your Computer . . General Precautions . . . . . . . . . . . . . . . . . . . . . . Maintaining Safe Use of and Access to Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction This User Guide introduces you to your wireless service and all the features of your new phone. Throughout this guide, you’ll find tips that highlight special shortcuts and timely reminders to help you make the most of your new phone and service. The Table of Contents and Index will also help you quickly locate specific information. Note: Because of updates in phone software, this printed guide may not be the most current version for your phone. Visit www.nextel.
Use and Care To care for your Motorola phone, keep it away from: liquids of any kind cleaning solutions The MOTOROLA BRUTETM i680 is designed to withstand being exposed to blowing rain when the battery door is attached properly, and the headset jack and microUSB connector are properly covered and sealed. Exposure to other liquids should be avoided, especially corrosive liquids. To clean your phone, use only a dry soft cloth. Don’t use alcohol or other cleaning solutions.
1. Setting Up Service 1. Make sure your SIM card is in place. 䡲 ⽧ Setting Up Your Phone (page 1) ⽧ Activating Your Phone (page 2) ⽧ Setting Up Voicemail (page 2) ⽧ Enabling Security (page 3) ⽧ Account Passwords (page 3) ⽧ Getting Help (page 4) 䡲 See “Installing the Battery” on page 10. 3. Press and hold the End/Power Key (@) for two seconds to turn the phone on. If your phone is activated, it will turn on, search for service, and enter standby mode.
4. Make your first call. Use your keypad to enter a phone number. 䡲 Press the Talk key (`). 䡲 Note: Your phone’s battery should have enough charge for your phone to turn on and find a signal, set up your voicemail, and make a call. You should fully charge your battery as soon as possible. See “Charging the Battery” on page 11 for details. Activating Your Phone 䢇 䢇 If you purchased your phone at a Nextel Store, it is probably activated and ready to use.
Enabling Security You must enable security the first time you power on your phone or within ten days of first activating your phone. 1. Press and hold @ for two seconds to power on your phone. 2. Press Ok (right softkey). 3. You are prompted to enable security. Press Yes (right softkey). A series of screens followed by the default homepage displays. 4. Press @ to return to standby mode.
Getting Help Operator Services Managing Your Account Operator Services provides assistance when you place collect calls or when you place calls billed to a local telephone calling card or third party. Online: www.nextel.com 䢇 䢇 䢇 䢇 䢇 䢇 䢇 Access your account information. Check your minutes used (depending on your service plan). View and pay your bill. Enroll for online billing and automatic payment. Purchase accessories. Shop for the latest phones. View available service plans and options.
Your Phone 2. Phone Basics Your Phone (page 5) ⽧ Getting Started With Your Phone (page 7) ⽧ Navigating Through Menus and Options (page 14) ⽧ Displaying Your Numbers (page 16) ⽧ Entering Text (page 16) ⽧ Accessories (page 20) Phone Basics ⽧ Open View Ready 5/10/09 10. Right Softkey 1. Left Softkey Contcs 2. Menu Key 3. Talk Key 4. Navigation Key Mesgs 9. OK Key 8. Camera Key 7. End/Power Key 6. Space Key 5. Back Key 2.
Closed View 3. Talk Key (`) allows you to place or receive calls, 11. Audio Jack 12. Speaker Button 17. Smart Button 4. Navigation Key scrolls through the phone’s menu 13. Volume Button 14. Direct Connect Button 16. Noise Cancellation Microphone answer Call Waiting, or use Three-Way Calling. options and acts as a shortcut key from standby mode. 5. Back Key (*) deletes characters in text entry mode. When using the Web, it allows you to return to the previous page. 6.
in speaker mode. In standby mode, pressing the speaker button turns Direct Connect speaker mode on and off. 13. Volume Button allows you to adjust the ringer volume in standby mode, the voice or speaker volume during a call, and the speaker volume while using the music player or other applications. 14. Direct Connect (DC) Button allows you to use Nextel Direct Connect®. (See page 28.) 15. Micro USB Connector allows you to connect your charger or other accessories to your phone. 17.
Your SIM Card Locating the SIM Card Your SIM (Subscriber Identity Module) card is a small card inserted into the SIM card holder within your phone below the battery. If no SIM card came with your phone, contact Nextel Customer Service at 1-800-639-6111. Most users will never need to remove or insert the SIM card. However, if it becomes necessary, follow the instructions in “Removing and Inserting the SIM Card” on page 8. Important: The SIM card is designed for optimal Contacts storage and feature use.
Store it carefully. Battery and Charger WARNING: Use only Nextel-approved or Motorola-approved counter-clockwise to release the battery cover, and then remove the battery cover from the back of the phone. batteries and chargers with your phone. The failure to use a Nextel-approved or Motorolaapproved battery and charger may increase the risk that your phone will overheat, catch fire, or explode, resulting in serious bodily injury, death, or property damage. 2.
Note: Long backlight settings, searching for service, vibrate mode, browser use, and other variables may reduce the battery’s talk and standby times. Tip: Watch your phone’s battery level indicator and charge the battery before it runs out of power. WARNING: Do not use a sharp object to unlock the battery door as it may damage the lock. 2. Place the tip of your finger in the battery door recess, and lift the battery door to remove it from the phone. Installing the Battery 1.
4. Replace the battery cover and firmly press it down into place to ensure a proper watertight seal. With a coin, turn the battery door latch clockwise to the locked position. Charging the Battery Charge your battery as soon as possible so you can begin using your phone. Phone Basics Always use a Nextel-approved or Motorola-approved desktop charger, travel charger, or vehicle power adapter to charge your battery.
Water Resistance and the audio jack and microUSB port must be properly sealed. Audio Jack WARNING: Exposing your phone to water outside of these limits, or not using the precautions stated, can result in water damage. Turning Your Phone On and Off Turning Your Phone On 䊳 Press and hold @ for approximately two seconds. As your phone connects to the network, you see a connecting message. Your phone may require you to enter identifying information to use it or to access specific features.
t Group In Use — Your phone is active on a Group Connect call. Viewing Status Information 4 Direct Talk — Your phone is off network and set to Direct Talk mode. r Talkgroup In Use — Your phone is active on a Talkgroup call. c Bluetooth In Use — Your phone is using Bluetooth. If this icon is blinking, your phone is in discoverable mode. If this icon is static, a Bluetooth connection is active.
W Hearing Aid — Your phone is set for use with a hearing aid and is active on a phone call. See “Using Your Phone With a Hearing Aid Device” on page 161. : Voice Record — You have one or more voice records stored. See “Voice Records” on page 118. " Speaker Off — Direct Connect sound is set to come through the earpiece rather than through the speaker. 26 13 5 Messages — You have one or more messages. See “Message Center” on page 47.
Shortcuts and Personalized Keys As you navigate through the menu, menu options are highlighted. Select an item by highlighting it and pressing r. In standby mode, your phone gives you ways to quickly access features you use frequently: 䢇 Use the Shortcuts feature (page 82) to quickly access most menu options by pressing a number on your keypad or saying the voice name of the shortcut.
Displaying Your Numbers My Info lets you view your phone number, Direct Connect number, and other phone information. 䊳 Press / > Tools > My Info. Entering Text Selecting a Text Input Mode Your phone provides convenient ways to enter letters, numbers, and symbols whenever you are prompted to enter text (for example, when adding a Contacts entry or when composing text and multimedia messages). To choose a text input mode: 1. At a screen requiring you to enter text, press / to change the text input mode.
2. Press the corresponding keys once per letter to enter a word. (For example, to enter the word “Bill,” press 2455.) (If you make a mistake, press Delete [left softkey] to erase a single character. Press and hold Delete [left softkey] to erase an entire entry.) The word will appear as an option the next time you scroll through options during Word Text Input. Tip: You cannot store alphanumeric combinations such as Y2K. To change the text input settings: 1. On a text entry screen, press /. 3.
By default, the first letter of an entry is capitalized and the following letters are lower cased. After a character is entered, the cursor automatically advances to the next space after two seconds or when you enter a character on a different key. Characters scroll in the following order: Key ABC DEF GHI JKL MNO PQRS TUV WXYZ English Sequence Space . ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ % £ $ ¥ ABC2ÁÃÂÀÇ DEF3ÉÊÈ GHI4ÍÌ JKL5 MNñO6ÓÕÔÒ PQ R S 7ß TUV8 Ú Ü Û Ù WXYZ 9 +-0*/\[]=><#§ Space Shift Caps Lock Back 1
messages easier by allowing you to enter quick messages, such as “Meet me at,” “Let’s get lunch,” or a customized message of your own. Special Function Keys Some of the phone’s keys assume different functions while in Alpha or Word mode. Spaces Press # to enter a space. Capitalization When you press and hold the # key, it acts as a three-way toggle.
Accessories Using a Remote Direct Connect Button Your phone comes with the following accessories: 䢇 A Li-Ion battery and charger. 䢇 A128K SIM card. If you are using a headset or other optional accessory with a remote Direct Connect button, you can use the remote Direct Connect button for phone calls, Direct Connect calls, and Group Connect calls. Various accessories are available for use with your MOTOROLA BRUTE, including cases, vehicle power chargers, data cables, hands-free accessories, and more.
3.
more phones equipped with this capability (page 43). Answering Calls 1. Make sure your phone is on. Phone Calls Note: When your phone is off, calls go directly to voicemail. 2. Press ` to answer an incoming call. Making Calls Placing a traditional wireless phone call from your MOTOROLA BRUTE is as easy as making a call from any landline phone. 1. Make sure your phone is on. 2. Enter a phone number from standby mode and press `.
䊳 To end a call, press @ or close the phone. Missed Phone Calls Missed phone calls are forwarded to voicemail. When you do not answer an incoming call, you will see a Missed Call notification. To display a Missed Call entry from the notification screen: 䊳 Press View (left softkey). (To dial the phone number, press ` after displaying the entry.) To display a Missed Call entry from standby mode: 1. Press ` or / > Recent Calls. 2. Highlight an entry and press r.
Important: Always report your location to the 911 operator when placing an emergency call. Some designated emergency call takers, known as Public Safety Answering Points (PSAPs) may not be equipped to receive GPS location information from your phone. Emergency calls cannot be placed while the keypad is locked. If you have not registered on the network, emergency calls cannot be placed while your SIM card is in your phone.
Speakerphone 䊳 Press ) or Speaker (right softkey) during a call to route the phone’s audio through the speaker or the earpiece. To view Call Details and Call Info: 1. Select a recent call. 2. Press r to view the Call Details. 3. Press r again to view the Call Info. WARNING: Because of higher volume levels, do not place the Mute 䊳 Press Mute (left softkey) during a call to mute the microphone. Press Unmute (left softkey) to unmute the microphone.
Finding a Number To find Contacts entries, you can either scroll through the list using your navigation key or you can search Contacts entries by name. 1. Press / > Contacts. 2. Press Search (left softkey). 3. Enter the first few letters of a Contact's name and press r. (The first contact entry that matches the entered text will be highlighted.) 4. To display the Contacts entry, press r. To dial the entry's default phone number, press `.
Making a Call From Contacts 1. Press / > Contacts. 2. Highlight an entry and press ` to dial the default phone number. 2. Say a voice name. Your phone plays the name back to you. 3. The call is placed automatically. Tip: To stop a phone call from being completed, press @. – or – Making a Call From Recent Calls 1. Press ` or / > Recent Calls. 2. Highlight an entry and press `.
1. Enter a speed dial number and then press #. 䢇 2. Press ` to dial the number. ® To use Turbo Dial for speed dial locations 1–9: 䊳 Press and hold the appropriate key for approximately two seconds. The display confirms that the number has been dialed when it shows “Calling...”. Redialing the Last Number 䊳 Press and hold `.
Dialing Direct Connect Numbers Every Direct Connect number has three parts: 䢇 An area ID. 䢇 A network ID. 䢇 A member ID. An asterisk separates each part (for example: 999*999*9999). When you enter a number containing all three parts, you must separate them with asterisks. Note: The number of digits in each part of a Direct Connect number may vary. For example, your Direct Connect number may be formatted as 999*999*9999, while another valid number may appear as 555*555555*55.
Making Direct Connect Calls Using a Voice Name If you have created a voice name in Contacts, say the voice name into your phone to enter the number. 1. Press and hold the speaker button (s) until a prompt appears telling you to say the name. 2. Say the name. Your phone plays the name back to you. 3. Press and hold the DC button. Answering Direct Connect Calls When you receive a Direct Connect call, your phone emits a tone or vibrates. You then hear the voice of your caller. 1.
selecting a Direct Connect number. See “Starting a Group Connect Call With a Direct Connect Number” on page 32. Answering Group Connect Calls 䊳 Proceed as if answering a Direct Connect call from one user. Only one person at a time may speak on a Group Connect call. Creating Groups in Contacts 1. Press / > Contacts. 2. Select [New Group]. 3. To assign a name to the Group, enter the name. Note: If you do not assign a name, the Group is named “Group” followed by the number of members in the Group.
3. Press Done (left softkey) and then press Save (left softkey) to save the group. To add Group members manually from the keypad: 1. While creating a Group, select [Add Number]. 2. Enter the Direct Connect number. 3. Press r and then press Save (left softkey). Starting a Group Connect Call With a Direct Connect Number 1. Press / > Push To Talk > Direct Connect, select Members” on page 31. 4. To save the Group, press / > Store Group. – or – To call without saving, press Done (left softkey). 5.
Storing Groups To store a group to Contacts from the Recent Calls list: 1. From the Recent Calls list, select a Group and press Save (left softkey). 2. Add more information to the entry (optional). 3. Press Save (left softkey). To store a group to Contacts from an active call: 1. During an active Group Connect call, press / > Store Group. 2. Add more information to the entry (optional). Note: You cannot record a voice name during an active call. 3. Press Save (left softkey).
Group Connect Call Details During a Group Connect call, you can view details about the other group members, such as their name or Direct Connect number, and their status on the call. To view Group Connect call details: 䊳 Press Details (left softkey). In the Details view, these icons appear next to member names or Direct Connect numbers: 34 F The member of the Group who is speaking. E A member of the Group who is active on the Group Connect call, but not speaking.
1. While in a Direct Connect call, press Picture (right softkey). A list of pictures that can be included in a Direct Connect call appears. 2. Select a picture and press the DC button to send it. 3. Wait while the picture is transmitted. The Direct Connect call is temporarily interrupted while a picture is transmitted. 4. When prompted, press the DC button to resume the Direct Connect call.
Pictures you receive are saved to your phone’s memory and are accessible through the Media Center. When you receive a picture, it appears every time you are in a Direct Connect call with the person who sent it unless you delete the picture from the Media Center. This occurs for the last 20 people who sent you pictures. To accept a picture: 1. When you see the message asking you to accept the picture, press Yes (left softkey). (To decline the picture press No [right softkey].) 2.
You can control what portion of the information in My Info is sent and whether it is sent automatically in every Direct Connect call or only when you choose to send it. Tip: When you send My Info, certain information, such as your email address or fax number, cannot be included. To send complete contact information, create an entry for yourself in Contacts and send it. The information your phone sends always includes My Name and Direct Connect.
4. When Ready to Send appears, press the DC button to send the information. 2. Press / > Send Via... > Direct Send. Note: If the Contacts entry you scrolled to is a Group, you may be prompted to allow yourself to be a part of the group being sent. Press Yes (left softkey) to become part of the group. Sending Contact Information You can send contact information by selecting a Contacts entry. Contacts entries that contain only addresses cannot be sent.
You can send a Group using Nextel Direct Send so that the person who receives the Group can use the list. To send a Group from the Recent Calls list: 1. From Recent Calls, highlight a Group and press / > Send Group. 2. To include yourself in the Group, press Yes (left softkey). To exclude yourself, press No (right softkey). Note: If you choose to include yourself and the Group already contains 20 members, you will be prompted that the list is full. You will be excluded from the list. 2.
participation in a Talkgroup is determined by an administrator. Here are the ways Group Connect and Talkgroup calls differ.
2. Press the DC button and continue as if making a 2. When “Ready to Alert” appears, press the DC button to send the Call Alert. Note: You can send a Call Alert from Recent Calls or Contacts. Select a Direct Connect number and continue as explained above. Direct Connect call. Receiving Talkgroup Calls 䊳 Answer it as you would a regular Direct Connect call. Only one person at a time may speak on a Talkgroup call. Responding to a Call Alert Note: You can set a distinctive ringer for Call Alerts.
Using the Call Alert Queue This removes the Call Alert from the queue. When you queue a Call Alert, it remains in the Call Alert queue until you make a Direct Connect call to the sender or delete it. To send a Call Alert to the sender: Viewing Call Alerts 1. Press / > Push To Talk > Call Alert. 2. Scroll through the list. Viewing Call Alert Date and Time 1. Press / > Push To Talk > Call Alert. 2. Select a Call Alert and press r.
After a failed incoming or outgoing Direct Connect call or Call Alert, you can send a message to the caller or intended recipient. To set up a message for incoming or outgoing calls: 1. Press / > Settings > Advanced > Call Completion > Incoming Call or Outgoing Call. 2. In the Send Msg field, select Off, Ask First, or Automatic. 3. Select Message and create a message to be sent, or press QNotes (left softkey) and select a predefined message. 4. Press r and then press Back (right softkey).
range. This varies according to terrain, man-made structures, and atmospheric conditions. Most traditional phone features are not available in Direct Talk mode, including on-network phone calls; Direct Connect, Group Connect, Talkgroup calls, and Call Alerts; data services; messaging; call timers; and call forwarding. Setting Your Phone to Direct Talk Before you and another caller can use Direct Talk, both of your phones must be set to Direct Talk mode. 1. Press / > Push To Talk > Direct Talk. 2.
When you receive a Code call using Direct Talk, your phone displays Receiving, along with the channel and code selected. Reply as on a Direct Connect call. Private Direct Talk Calls Private Direct Talk allows you to silence all the calls on a channel that are not directed specifically at you. To do this, you must first set your phone to Private Only. To set your phone to Private Only: 1. In Direct Talk mode, press Edit (left softkey) > Code > Pvt Only. 2.
Receiving All Calls on a Channel You can set your phone to receive all Direct Talk transmissions that are within range and set to the same channel. Do this by selecting Receive All, instead of a code. You cannot initiate a call when the code is set to Receive All. If you press the DC button to initiate a Direct Connect call and your code is set to Receive All, you receive an error message. To set the code to Receive All: 1. In Direct Talk mode, press Edit (left softkey) > Code > Receive All. 2.
⽧ Message Center (page 47) ⽧ Receiving Messages (page 48) ⽧ Voicemail (page 49) ⽧ Multimedia Messages (MMS) (page 50) ⽧ Text Messaging (SMS) (page 59) ⽧ Caller ID Blocking (page 59) ⽧ Call Waiting (page 60) ⽧ Making a Second Call (page 61) ⽧ Making a Three-Way Call (page 61) ⽧ Call Forwarding (page 61) ⽧ Making International Calls (page 64) ⽧ Special Dialing Codes (page 64) ⽧ Nextel Phone Services (page 65) Message Center The message center manages your messages.
䢇 䢇 䢇 䢇 Drafts — access MMS messages you have created and saved but not sent. Outbox — store MMS messages that were not sent. Sent Items —access MMS messages you have sent. Net Alert — access alerts that you receive from Nextel. Receiving Messages 䊳 To dismiss the message notification, press Later (right softkey). If you dismiss the notification, the message is not deleted. You can access it through the message center.
Tip: To receive voicemail messages, you must first set up your voicemail box. If you are bringing your phone number from another carrier, we suggest you set up your voicemail box after the number you brought to Nextel is active on your Nextel phone and your temporary phone number is deactivated. If you set up your voicemail box prior to this, all messages and all settings (including your greeting and password) will be lost when the number you have brought to Nextel becomes active.
Multimedia Messages (MMS) Multimedia Messaging Service (MMS) lets you send and receive messages that may include text, pictures, and audio recordings. Your MMS address is PTN@messaging.nextel.com. Your PTN is your ten-digit Nextel Personal Telephone Number. Note: Most common phone-to-phone text messages are sent and received as MMS messages on your MOTOROLA BRUTE. Text messages sent from other phones or mobile devices to your phone number arrive as MMS messages. Accessing MMS Messages 1.
In message fields that require you to enter text, you can begin entering the text from the keypad when the field is highlighted. While entering text, press / to choose a text input mode from the context-sensitive menu. (See “Entering Text” on page 16.) Message Size You can create and send messages of up to 100 KB, including attachments for MMS. The size of the message appears at the top of the display as you are creating the message.
3. To enter or edit the body of the message: 䡲 Select Message and then use any of the following options to enter your message. Note: If you have created a signature, the signature automatically appears in this field. Text you enter appears before your signature. (See “Adding a Customized Signature” on page 77.) ● ● ● Enter text from the keypad. Use a Quick Note. See “Quick Notes” on page 54. Insert a picture, a ring tone, or an audio file. See page 54. When you are finished, press r. 4.
You can reply to a read message while you are viewing it or while it is highlighted in the Message Center. You cannot reply to unread messages. When you reply to a message, some of the fields in your reply are filled in automatically. These may include To, Message (the first 40 characters of the received message), Subject, and Cc. To reply to a message: 1. Display or highlight a read message and press Reply (left softkey). (To reply to the sender and all recipients, press / > Reply All.) 2.
2. If the entry has more than one phone number stored, display the phone number to which to send the message. 3. Press Create (left softkey) or press / > Create. 4. Create and send the message. To begin a message from standby mode: 䊳 Enter a phone number and press / > Create Message. To begin a message from the Media Center: 1. From the Media Center, highlight or select a picture or audio file. 2. Press Send (left softkey). 3. Create and send the message.
to take a new picture or video to send. Inserting Audio Files or Voice Records You can insert audio files from the Media Center or voice records from your voice records list. Preloaded audio files or files with the forward locked icon (u) cannot be included in a message. 1. Highlight the Message field and press / > Insert > Insert Audio. (You will see a list of available audio files.) Tip: To hear an audio file before inserting it, highlight the file name and press Preview (left softkey). 2.
Sent Items Receiving a Message The Sent Items folder holds all messages that have been sent. When you receive an MMS message, a message notification appears on the display. Forwarding Sent Items To view the message: 1. Press / > Messages > Sent Items. 2. Highlight a message and press / > Forward. 3. Address, edit, and send your message. 䊳 To dismiss the message notification: 䊳 Outbox Messages you tried to send are stored in the Outbox. Press r or press Read (left softkey).
Navigating a Message Actions for Received Messages As you scroll through a message, numbers, email addresses, and Web addresses are highlighted. Deleting Embedded Objects and Attachments Messages may contain pictures or audio files as part of the body of the message or as attachments. If a message contains pictures or audio files in the body of the message, highlight each picture or audio file to view or play it.
Locking and Unlocking When you lock a message, it cannot be deleted until you unlock it. 䊳 Highlight or view a message and press / > Lock Message or Unlock Message. To make a Talkgroup call to a Talkgroup ID in a message: 1. View the message. 2. Highlight a Talkgroup ID and then press / > Talkgroup. 3. Press the DC button.
Note: Most traditional phone-to-phone text messages arrive as MMS messages on your MOTOROLA BRUTE. Your phone can send and receive MMS messages. If a message contains one or more Web addresses, you can go to the website. Your phone can receive SMS text messages, but it cannot send them. 1. View the message. 2. Highlight a Web address and then press / > Go To Website. Note: The entire Web address must appear in the message. Otherwise, you cannot go to the website.
Your Nextel phone number cannot be blocked from calls made to 911, 800, 855, 866, 877, 888, or other toll-free phone numbers. To accept the second call and end the active call: 1. Press @. Your phone rings with the second call. 2. Answer the second call. Per-Line Blocking You can request that Nextel Customer Service permanently block delivery of your phone number on every call you make. In this case, you may need to display your number for certain calls.
Making a Second Call 1. Place or receive a phone call. 2. While the call is active, press / > 2nd Call. (The first call is placed on hold.) 3. Enter a second phone number and press ` to place the call. Note: For quick ways to enter the number, press /. To end the second call and make the on-hold call active: Press @. To make the on-hold call active and put the active call on hold: 䊳 (The first call is placed on hold.) 2. Enter a second phone number and press `. 3. Press Join (right softkey).
Call Forwarding sends calls to the phone numbers you specify. You can forward all calls to one number or forward missed calls to different numbers depending on the reason you missed the call. Forwarding All Calls When you set your phone to forward all calls, an icon appears in the top row of the display: & Phone line 1 is active; calls to phone line 1 are being forwarded. ) Phone line 1 is active; calls to phone line 2 are being forwarded.
Forwarding Missed Calls Calls you miss are forwarded according to the options set for missed calls. By default, missed calls are forwarded to voicemail. You can specify a forwarding number for each type of missed call: 䢇 If Busy — Your phone is on a call or transferring data. 䢇 If No Answer — You do not answer on the first four rings. 䢇 If Unreachable — Your phone is out of coverage or powered off. Note: You are charged a higher rate for calls you have forwarded. To forward missed calls: 2.
Making International Calls Your service default is “International Calls Restricted.” Contact Nextel Customer Service to obtain international dialing access. Calls placed between the United States and Canada do not require an international access code. Special Dialing Codes number. Relay service works through a Communications Assistant who reads messages typed into a TDD/TTY device by a speech or hearing impaired individual to you.
HCO (Hearing Carry-Over) – Type text on your TTY and listen to voice replies on your phone. 䢇 Choose a Second Line Service plan that fits your needs. Nextel Phone Services In order to activate Second Line Service, contact your Nextel Sales Representative or call Nextel Customer Service. Contact Nextel Customer Service to obtain these services or for additional information. To set the active line (primary or alternate): Note: Some services are not available outside of the continental United States.
5. Data Services ⽧ Wireless Data Services (page 66) ⽧ Downloading Content (page 68) Wireless Data Services With Web access on your phone, you can browse your favorite websites, making it easier than ever to stay informed while on the go. Follow sports scores, breaking news, and weather, and shop on your phone anywhere on the Nextel National Network. Using the Web Browser Navigating the Web from your phone is easy once you get the hang of it. Opening the Browser 䊳 66 Press / > Web > Net. 5.
To go to a particular website by entering a Web address (URL): 1. From the home page, select Go to URL. Note: Bookmarking a page does not store the page contents, just its address. Data Services Going to a Specific Website Some pages cannot be bookmarked. Whether a particular Web page may be marked is controlled by its creator. 2. Press Edit (left softkey). 3. Use your keypad to enter the Web address and press Done (left softkey). 4. Press Options (right softkey) > accept to go to the website.
Reloading a Web Page Downloading Content 1. Press and hold / to open the browser menu. 2. Select Refresh this page. (The browser will reload the current Web page.) Restarting the Web Browser If the Web browser seems to be malfunctioning or stops responding, you can usually fix the problem by simply restarting the browser. 1. Press and hold / to open the browser menu. 2. Select More... > Restart Browser. Your phone arrives with Java applications and games loaded and ready to install.
Sound Settings Ring Tones Your phone provides a variety of ringer options that allow you to customize your ring and volume settings. These options allow you to identify incoming calls and messages by the ring. ⽧ Sound Settings (page 69) ⽧ Display Settings (page 73) ⽧ Messaging Settings (page 75) ⽧ Airplane Mode (page 77) ⽧ Setting One Touch Direct Connect (page 78) 1. Press / > Multimedia > Ring Tones. ⽧ Headset Options (page 78) 2. Scroll through the list of ring tones.
Assigning a Ring Tone to a Contact Downloading More Ring Tones You can also assign a ringer to a specific contact entry so you know who's calling without looking at the phone. To use other ring tones, you can download them into your phone for a fee. 1. Press / > Multimedia > Ring Tones. 2. Scroll through the list of ring tones and select one. A sample ringer will sound as you highlight each option 䊳 Press / > Multimedia > Ring Tones > Buy Ring Tones. Note: Ring tones may be downloaded only once.
Press / > Multimedia > Ring Tones > Vibrate All. Set this option to On or Locked. Tip: Setting this option to Locked requires you to press and hold the volume control up to turn Vibrate All off. The Locked option helps prevent you from accidentally turning Vibrate All off. To delete a ring tone: 1. Press / > Multimedia > Ring Tones. 2. Make sure Vibrate All is set to Off. 3. Highlight a ringtone and press / > Delete. To deactivate Vibrate All: 1. Press and hold the volume key up to unlock 4.
/ The phone vibrates then rings for all calls. Silence All , The ring volume is set to zero for all calls. The Silence All option allows you to mute all sounds without turning your phone off. Ring and Vibrate To set your phone to ring and vibrate when you receive phone calls or Call Alerts: To activate Silence All: 䊳 1. Press / > Multimedia > Ring Tones. 2. Make sure Vibrate All is set to Off. 3. Scroll through the list and select a ring tone. 4. Press / > Assign w/Vibe. 5.
Adjusting the Phone’s Volume Settings Display Settings Adjust your phone’s volume settings to suit your needs and your environment. Changing the Backlight Time Length 2. Select Ringer/Alerts, Speaker, Earpiece, Multimedia or Keypad. 3. Choose a volume level and press r. Tip: You can adjust the ringer volume in standby mode (or the earpiece volume during a call) by using the volume key on the left side of your phone.
2. Select an image and press View (left softkey) to view it. Press Back (right softkey) to return to the available images. 3. Press r to assign an image. Setting Wallpaper to Change Automatically When you set your wallpaper to change automatically, your phone uses each of the pictures in Media Center as wallpaper, cycling through them at a pace you choose. 1. Press / > Settings > Display/Info > Wallpaper > Internal or External > Auto Cycle. 2.
Adjust the font when entering text (for example, when using the notepad or when adding a Contacts entry). 1. Press / > Settings > Display/Info > Text Size. 2. Highlight an option and press r. Messaging Settings also choose to be notified with a sound while making a phone call. 1. Press / > Settings > Phone Calls > Notifications. 2. Highlight Receive All, Message Mail Only or Delay All and press r. Note: Delay All is the default setting.
䢇 MMS Setup — allows you to set up the following: 䡲 Friendly Name — lets you enter the name displayed in the From field on messages you send. 䡲 Download Options — lets you control message downloads. Automatic downloads messages automatically. Manual requires you to reply to a prompt before messages download to your phone. 䡲 Replies — lets you create new reply phrases and edit or delete reply phrases you have created. To access the Setup menu: 1. Press / > Messages. 2.
2. Enter a signature and press r. (See “Entering Text” on page 16.) The cleanup option controls how long messages remain in the Inbox and Sent Items before they are deleted. You set the cleanup option for the Inbox and Sent Items separately. Airplane Mode The cleanup option deletes only read, unlocked messages. Sometimes you may want to have your phone on, but turn off its ability to make and receive calls and other transmissions. To set the cleanup options: 1.
To restore your phone’s ability to do all these things: 䊳 Set this option to On and then press Yes (left softkey). Note: When Transmitters is set to Off, your phone’s Bluetooth capability is disabled, and all active Bluetooth connections are dropped. Headset Options To set your phone to send incoming sound to a headset only, or to a headset and a speaker at the same time: 1. Press / > Settings > Advanced > Headset/Spkr. 2.
Tip: The profile that is currently in effect on your phone has a checkmark next to it. 3. Scroll to view settings. Switching Profiles 1. Press / > Tools > Profiles. 2. Highlight a profile and press r. The profile you selected is now in effect.
Storing a Temporary Profile To store a temporary profile as a new profile: 1. Press / > Tools > Profiles. 2. Highlight the temporary profile and press / > Store As New. 3. Enter a name and press r. To overwrite the profile the temporary profile is based on: 4. Press Create (left softkey). 5. Scroll through the list of options and set their values. 6. When you are finished, press Done (right softkey). Editing Profiles 1. Press / > Tools > Profiles. 1. Press / > Tools > Profiles. 2.
1. Press /> Tools > Profiles. 2. Press / and then select Delete All. 3. Press r or press Yes (left softkey) to confirm. Setting Call Filtering The call filtering setting in each profile lets you control which calls, Call Alerts, and message notifications your phone notifies you of, and which it ignores. 1. While setting options for a profile, select Call Filter. 2. Select a filtering option 䡲 Phone – sets filtering options for phone calls. ● Off – notifies you of all calls. ● All – ignores all calls.
Phone Setup Options Shortcuts Your phone offers you the option of assigning shortcuts to favorite or often-used functions. Pressing the / key in standby mode followed by the assigned shortcut key will launch your personally designated shortcuts. Creating a Shortcut Note: When you receive your phone, all number keys may already be assigned to shortcuts. If this is the case, you can create new shortcuts by deleting or replacing existing shortcuts. 1. Go to a menu item.
The shortcut with that voice name is then highlighted. To view a list of your shortcuts: 䊳 Press / > Settings > Personalize > Shortcuts. Editing a Shortcut To change the order of shortcuts: To change the number or voice name assigned to a shortcut: 1. Press / > Settings > Personalize > Shortcuts. 2. Highlight any shortcut and press Edit (left softkey). 3. With Key or Voice highlighted, press r to change assignments. 4. Press Done (left softkey). 1. Press / > Settings > Personalize > Shortcuts.
Carousel Personalize Carousel is an iconic list of application shortcuts displayed horizontally at the bottom of the display in standby mode that allows you to access a total of nine applications. In addition to Shortcuts, the Personalize menu gives you other options to access menu items easily. To scroll through the list of icons, press the navigation key right or left to highlight an icon, and press r to select the icon.
Display Language You can choose to display your phone’s onscreen menus in several languages. 1. Press / > Settings > Display/Info > Language. Setting Prepend Dialing The Prepend feature lets you set a prefix to be added to the beginning of all dialed numbers, such as a country code for international calls. 1. Press / > Settings > Phone Calls > Prepend. 2. Select Prepend > On. 3. Enter a prefix in the Number field (such as +1 for international calls) and then press r.
1. Press / > Settings > Advanced > Reset Defaults > Reset Settings. 2. Enter your phone’s six-digit security code and press Ok (left softkey). (A disclaimer is displayed.) Note: Your security code is a six-digit number used for resetting your phone. Please contact Nextel Customer Service if you do not know your security code. 3. Read the prompt and press Yes (left softkey) to complete the reset. (Press No [right softkey] to cancel.
By Permission — When an application attempts to view the location of your phone, you will be prompted to give permission. However, location information may still be available to the phone’s owner, fleet manager, or account administrator. Setting the GPS PIN Security Feature To prevent your GPS privacy settings from being altered without your knowledge, your GPS privacy option can be protected by a PIN.
These options control the privacy of all Java applications on your phone. 3. Press / > Permissions. 4. Select privacy options for this application (you may set them for each of the menus available under Permissions): 䡲 Always — The application always has permission to access the phone’s location without notification. 䡲 Ask — When the application requests access to the phone’s location, you are prompted to grant or deny permission (see “Granting or Denying Permission” on page 88).
Tkgrp Area — lets you define your Talkgroup area. 䡲 One Touch DC — sets One Touch Direct Connect. 䡲 Alert Type — controls how your phone notifies you when you receive Direct Connect calls, Group Connect calls and Talkgroup calls. 䡲 On/Off Settings — sets your phone’s ability to send and receive pictures in Direct Connect calls. See “Starting a Call by Sending a Picture” on page 35.
Entering the PIN 1. Press and hold @ to turn on your phone. 2. When the SIM PIN screen appears, enter your SIM PIN and press Ok (left softkey). Important: If you enter your PIN incorrectly three times, your SIM card is blocked. See “Unblocking the PIN” on page 90. Changing the PIN Code (PUK). Follow their instructions for unblocking your SIM PIN. Important: If you unsuccessfully enter the PUK code ten times, your SIM card is permanently blocked and must be replaced.
䊳 At the “Enter Unlock Code” prompt, enter your unlock code and press Ok (left softkey). Changing the Lock Code Locking Your Keypad When your phone is closed and in standby mode, your keypad locks to prevent accidental key presses. 䊳 1. Press / > Settings > Security > Change Passwords. 2. Select Unlock Code then enter your current unlock /*. 䊳 code and press Ok (left softkey). 3. Enter and reenter your new lock code, pressing Ok (left softkey) after each.
7. Recent Calls ⽧ About Recent Calls (page 92) ⽧ Viewing Recent Calls (page 94) ⽧ Recent Calls Options (page 94) ⽧ Saving Items From Recent Calls (page 95) ⽧ Deleting Items From Recent Calls (page 95) ⽧ Prepending a Number From Recent Calls (page 96) About Recent Calls The Recent Calls list displays the last 20 numbers (or Contacts entries) for calls you placed, accepted, or missed, and for Call Alerts you have received.
For phone calls, an additional icon appears giving information about the call. - A call you made. 1 A call you received. # A missed call. Missed calls appear on the Recent Calls list only if you have Caller ID. When you select a call to view its details, you see information such as the name associated with the call, the number, date, time, and duration of the call. My Info From Other Phones The Recent Calls list displays My Info sent from other phones.
separate item on the Recent Calls list, above the information sent. If one person sends you more than one item of contact information, all the items appear below the person’s name or Direct Connect number. When you select contact information to view its details, you see the name or Direct Connect number of the person who sent the information and all the information in the item.
highlighted entry. You can also view the next Recent Calls entry by pressing the navigation key right or view the previous entry by pressing the navigation key left. Saving Items From Recent Calls 1. From Recent Calls, highlight or select an item. 2. Press Save (left softkey). – or – If Save is not one of your options, press / and then select Save or Update Contacts. Tip: If the item you are storing is a call, Save does not appear if the number is already stored in Contacts. 3.
Prepending a Number From Recent Calls If you need to make a call from the Recent Calls List and you are outside your local area code, you can add the appropriate prefix by prepending the number. 1. Highlight or select a Recent Calls entry and press / > Add Prepend. 2. Enter the prefix and press ` to call the number. 96 7.
About Contacts ⽧ About Contacts (page 97) ⽧ Creating Contacts Entries (page 98) ⽧ Viewing Contacts (page 100) ⽧ Adding a Number to an Entry (page 101) ⽧ Editing Entries (page 101) ⽧ Deleting Entries (page 102) ⽧ Assigning Speed Dial Numbers (page 102) ⽧ Selecting a Ringer Type for an Entry (page 103) ⽧ Assigning a Picture to an Entry (page 103) Contacts stores up to 600 numbers or addresses. Each Contacts entry can store several numbers or addresses.
Creating Contacts Entries Types of Contacts Each number or address stored must be assigned a Contacts type: A Mobile phone number 0 DC Direct Connect number i Work1 phone number j Work2 phone number k Home phone number l Email email address n Fax phone number o Pager phone number r Talkgroup Talkgroup number t Group Group q IP IP address p Other phone number 98 8.
1. Press / > Contacts > [New Contact]. 2. To assign a name to the entry: 䡲 Select Name. Enter the name and press r. 3. To assign a ring tone or picture to the name (optional): Select Ring Tone/Picture, select a ring tone or picture, and then press Back (right softkey). 䡲 4. To assign a Contacts type to the number or address being stored: Highlight the Contacts type field. 䡲 Scroll left or right to select a Contacts type (Mobile, DC, Work1, Work2, Home, Email, Fax, Pager, Talkgroup, Group, IP or Other).
䡲 Enter the additional information for the entry using steps 2–9. You must assign a name to the entry, if you have not already. 11. Press Save (left softkey). Creating Pauses and Waits When storing a number, you can program your phone to pause or wait between digits while dialing. A pause makes your phone pause for three seconds before dialing further. A wait makes your phone wait for your response before dialing further.
Filtering Contacts Entries You can set Contacts to display only entries containing Direct Connect numbers, Groups, and Talkgroups. 䊳 Press / > Contacts > / > Filter > Show DC. Select Show All to display all Contacts entries. Finding Speed Dial Numbers 䊳 Press / > Contacts, select an entry and select a phone number. The speed dial number is listed directly under the contact phone number. Adding a Number to an Entry 1. Display a Contacts entry. (See “Viewing Contacts” on page 100.) 2.
Deleting Entries 1. Press / > Contacts and highlight an entry. 2. Press / > Delete Contact. 3. Press r or press Yes (left softkey) to confirm. Deleting a Number or Address 1. Press / > Contacts and highlight an entry. 2. Scroll left or right to display the Contacts type to delete. 3. Press / > Delete Number. 4. Press r and Yes (left softkey) to confirm. Note: If an entry contains only one number or address, deleting the number or address deletes the entry.
4. Enter an available speed dial number and press r. 5. Press Back (right softkey) and then press Save (left softkey) to save the changes. Note: If you attempt to assign an already in-use speed dial location to a new phone number, a message will appear asking if you wish to overwrite the existing speed dial assignment. Press Yes (left softkey) to assign the location to the new phone number and delete the previous speed dial assignment.
䢇 9. Tools ⽧ Datebook (page 104) ⽧ My Info (page 109) ⽧ Java Applications (page 110) ⽧ Digital Rights Management (DRM) (page 111) ⽧ GPS Enabled (page 113) ⽧ Memo Feature (page 117) ⽧ Voice Records (page 118) ⽧ Call Timers (page 120) Datebook Datebook stores up to 250 events. You can store events over a thirteen month period — twelve months after and one month before the current date. A Datebook event contains: 104 9.
To view an event: 1. Select the day the event occurs. 2. Select the event. To see more in day view: 䊳 Scroll up and down using the navigation key. To highlight a day in month view: 䊳 Tools You can view Datebook by the day, by the week, or by the month. You can also view the details of any event. 䢇 In day view, brief information about each event for that day appears. 䢇 In week view, events appear as markers corresponding to their times. 䢇 In month view, days with events are marked.
2. To assign a subject to the event, select Subject and: 䡲 Enter the name or enter a phone number, Direct Connect number, or Talkgroup number. – or – Press Browse (left softkey) to choose from common event names. 3. To assign a location to the event (optional), select Location and enter the location or enter a phone number, Direct Connect number, or Talkgroup number. 4. The start time automatically assigned to an event is the beginning of the day.
12. Once you have entered all relevant information and settings, press Done (left softkey). To cancel without saving: 䊳 Press Cancel (right softkey). 5. To change more information, follow the applicable instructions in “Creating Events” on page 105 to edit the event. 6. Press Done (left softkey) to store the event. Deleting Events 1. Select the day the event occurs. Editing Events 2. Select the event and press / > Delete. To change the details of an event: 3.
To view more details about the event: 䊳 Press View (left softkey). To dismiss the reminder: 䊳 Press Dismiss (right softkey). For Events With Java Applications If you assigned a Java application to start when the event starts, you can start the application when you get the reminder. 䊳 Press / > Launch.
To call a number: 䊳 Press ` or press / and then select Call # in Event. To make Direct Connect calls or Talkgroup calls: 䊳 Press the DC button. To send a Call Alert: 䊳 Press / > Alert # in Event, and then press the DC button. Customizing Datebook Setup 䊳 Press / > Tools > My Info. Information displayed includes My Name (optional, you may enter it yourself), Line 1, Line 2, Direct Connect, Group ID (Talkgroup number), Carrier IP, IP1 Address and IP2 Address.
Java Applications To suspend an application: Installing Applications To view your suspended applications: 䊳 1. Press / > Games and Apps. 2. Select an application or suite of applications. Messages appear as the application installs. 3. Press Done (left softkey). Running Applications Press / > Games and Apps > Suspended Apps. You can have up to three applications running at one time — one running in the foreground and two in the background. Resuming Applications 1. Press / > Games and Apps.
1. Press Games and Apps > Suspended Apps. 2. Highlight an application and press End (left softkey). To end all applications: 1. Press / > Games and Apps > Suspended Apps > / > End All. 2. Press r or press Yes (left softkey) to confirm. 3. To end all applications without letting them exit, press EndNow (left softkey) and then press Finish (right softkey). Downloading Applications To run more Java applications, you can download them into your phone.
management, is a system that defines how copyrighted multimedia content can be distributed and used. DRM limits items to time-based or count-based usage settings. Time-based settings let you use the given item for a specified interval. Count-based settings let you use an item for a specified number of times after you download it or for unlimited use. Managing Items Depending on how the third-party vendor has set rights for the given DRM item, you may be unable to perform some of the following tasks.
Under certain conditions, third-party vendors will let you download an item multiple times within a given time frame, even if you deleted the item. Please contact the third-party vendor of an item to learn more about the vendor’s download regulations. 1. Highlight a DRM item and press / > Delete. 2. If prompted, press Yes (left softkey). About Expired Items Most items will continue to display on your phone until you delete them. You can also choose to renew the license for an expired item.
establish a view of a wide area of open sky, such as in underground locations, inside or between buildings, or in dense tree cover), the GPS feature of your phone WILL NOT WORK. Walking or driving very slowly may also substantially reduce GPS performance. Making an Emergency Call 䊳 Dial 911 and press ` to be connected to an emergency response center. If you are on an active call, you must end it before calling 911.
䊳 䢇 Press Refresh (left softkey). It may take your phone several minutes to complete the process of determining your location, during which the phone displays “Scanning For Satellites.” 䢇 The Position screen displays the updated information. To cancel a location calculation before it is completed: 䊳 Press Cancel (right softkey) to return to the Position screen or press @ to return to standby mode.
䢇 Stay in network coverage. The network will provide your phone with information that helps determine your location more quickly and accurately. Using GPS With Map Software You can use the GPS feature of your phone to provide approximate location data to a laptop computer or similar device that is running interactive map software such as that made by DeLorme or Microsoft.
Make sure the COM port settings of your laptop or other device are set to the following: 䢇 Bits per second: 4800 䢇 Data bits: 8 䢇 Parity: None 䢇 Stop bits: 1 䢇 Flow control: Hardware Memo Feature To set your phone to send location information to your laptop or other device: To view the memo later: 1. Press / > Tools > GPS > Interface. 2. Set NMEA OUT to USB or Bluetooth. Your phone is now sending location data to your laptop or other device.
To make a call to the memo number: Voice Records 1. Press / > Tools > Memo. 2. To make a phone call, press `. To make a Direct Connect call, press the DC button. To store the memo number to Contacts: A voice record is a recording you make with your phone and can play back. You can record notes to yourself or phone calls. Your phone can store up to 20 voice records. 1. Press / > Tools > Memo. 2. Press / > Store to Contacts. 3. To store the number as a new entry, select [New Contact]. 1.
1. Press / > Multimedia > VoiceRecord. Deleting Voice Records To delete an unlocked voice record: 2. Highlight a voice record and press r. 1. Press / > Multimedia > VoiceRecord. 3. To stop the voice record while it is playing, 2. Highlight a record and press / > Delete. press r. Tip: To fast forward, scroll right. To rewind, scroll left. To pause or resume, press any number key. Tools Playing Voice Records 3. Press r or Yes (left softkey) to confirm. To delete all unlocked voice records: 1.
Managing Memory To view the amount of memory available for voice records: 1. Press / > Multimedia > VoiceRecord. 2. With [New VoiceRec] highlighted, press Memory (left softkey). Call Timers Call timers measure the duration of your phone calls, Direct Connect, or Group Connect calls, and the number of kilobytes sent and received by your phone: 䢇 Last Call — displays the duration of your most recent phone call. 䢇 Phone Reset — keeps a running total of your phone call minutes, until you reset it.
Inserting the microSD Card 10. microSD Card 1. Remove the battery cover. (See “Installing the Battery” on page 10.) 2. Open the memory card slot cover, and slide in the Using a microSD Card With Your Phone (page 121) ⽧ microSD Settings (page 123) ⽧ microSD Folders (page 124) ⽧ Connecting Your Phone to Your Computer (page 125) microSD Card memory card until it clicks into place.
Note: Be sure to use only recommended microSD cards. Using non-recommended microSD cards could cause data loss and damage your phone. Your handset can be used with Transflash or microSD memory cards. 4. Grasp the raised edge of the microSD card and pull the card out. 3. Close the memory card slot cover and replace the battery cover. 4. Your phone may prompt you to use the memory card to store new media items, go to Music Player, go to the Camera, go to the Media Center, or do nothing.
Tip: If your computer has an SD card slot or if you have an SD card adapter, you can use the microSD card and adapter to transfer files such as audio files, pictures, and videos directly between your computer and your microSD card. The supplied microSD adapter allows microSD cards to be used in SD-compatible devices such as digital cameras, printers, and computers. Before using, you will need to insert the microSD card into the microSD adapter.
Setting Storage Options You can set your phone to store pictures, videos, music, and audio recordings on an inserted microSD card instead of in the phone’s memory (when available). 1. With the microSD card inserted, press / > Settings > Memory Card > Store Media. 2. To store pictures, videos, music, and audio recordings on the memory card, select Prefer On Card. Formatting the microSD Card Formatting a microSD card permanently removes all files stored on the card. 1.
Before using your phone’s mass storage capabilities, you need to prepare your phone’s data services to synchronize with your desktop or laptop computer. Once the phone is connected to the computer, you can transfer your data to or from the microSD card. 1. With the microSD card inserted, press / > follow the onscreen instructions to safely unplug the USB cable. Important Connection Information 䢇 䢇 Settings > Connections > USB. 2. Highlight Memory Card Access and press r.
Tip: To take a self-portrait, activate the camera and then close the phone. Use the external screen to aim the lens, and then press the speaker button ()) to take the picture. 11. Camera 䡲 ⽧ Taking Pictures (page 126) ⽧ Camera Options (page 127) ⽧ Recording Videos (page 128) ⽧ Storing Pictures and Videos (page 130) Taking Pictures Taking pictures with your phone’s built-in camera is as simple as choosing a subject, pointing the lens, and pressing a button. 1.
Memory Card to access the memory card 䢇 Picture Quality to select the picture quality between Normal or Fine. 䢇 Picture Size to select the picture size. 䢇 White Balance to select a white balance setting. 䢇 Exposure Control to adjust the exposure. 䢇 Style to set the picture effect. 䢇 Memory Usage to verify memory usage. 䢇 Memory Card to access the memory card menu. 䢇 Camera Setup to set the camera default settings. menu.
Using the Zoom 䡲 tagged with the geographic location of where they were taken. Depending on your resolution settings, you can adjust the zoom from 1x to 4x. To adjust the zoom: GPS Tag: If this option is On, pictures will be Recording Videos 1. While in camera mode, press / > Zoom. 2. Select from 1X, 2X or 4X. Camera Setup Set your camera’s resolution and default size in the Camera Setup menu. 1. Press ? > / > Camera Setup. 2. Select an option and press r.
䡲 Review to play back the video. 䡲 Send Via... to send the video via Bluetooth or Messaging (MMS). 䡲 Save [OK] to save the video. 䡲 Media Center to go to the Media Center to review your saved videos. 䡲 Remove Card to enable the memory card removal. 䡲 Memory Usage to verify memory usage. 䡲 Camera Setup to set the camcorder default settings. Video Mode Options With the phone in video mode, press / to display additional options: 䢇 Media Center to go to the Media Center to review your saved videos.
Storing Pictures and Videos Card Folder Your phone’s pictures, video, and audio recordings storage area is called the Media Center. There are two types of folders in the Media Center: Phone and Card. You can save pictures and videos directly to the microSD card. Several pictures can be stored and managed in each folder on the microSD card, depending on its capacity. Setting Storage Options To review your pictures and videos on the microSD card: 1. Press / > Settings > Memory Card > Store Media. 1.
䢇 䢇 䢇 䢇 䢇 䢇 䢇 䢇 䢇 Set As Caller ID to display the currently highlighted picture for incoming calls from a specific Contacts entry. Select an entry and press r. Set As Wallpaper to display the currently highlighted picture as a wallpaper. Select Internal Display, External Display, or Both and press r. Copy To Card/Phone to copy the file from the current folder to the other. Move To Card/Phone to move the file from the current folder to the other. Delete All to delete all files in the folder.
To turn Bluetooth on: 12. Bluetooth 1. Press / >Tools > Bluetooth > Setup > Power. 2. Select On and press r to enable Bluetooth. To turn Bluetooth off: ⽧ Turning Bluetooth On and Off (page 132) 1. Press / > Tools > Bluetooth > Setup > Power. ⽧ Bluetooth Menu (page 133) 2. Select Off and press r to disable Bluetooth.
Bluetooth Menu The Bluetooth menu allows you to set up many of the characteristics of your phone’s Bluetooth service. 1. Press / > Tools > Bluetooth. 2. Set your Bluetooth options. Select Audio Devices to discover and connect to hands-free devices. 䡲 Select Pair to Devices to scan for and pair your phone to an available Bluetooth device. 䡲 Select Device History to link to devices that have been connected to your phone.
Note: Due to different specifications and features of other Bluetooth-compatible devices, display and operations may be different, and functions such as transfer or exchange may not be possible with all Bluetoothcompatible devices. To use Bluetooth during a call: 1. While in a call, press / > Use Bluetooth. 2. Select a device. Disconnecting From a Device Connecting to a Stored Device 1. Press / > Tools > Bluetooth > Audio Devices.
request permission before it can connect to your phone. Sending Items via Bluetooth Devices are automatically granted permission during the ten seconds after connecting. Sending Contacts, Datebook Events and Media Center Items Setting Device Details The device history stores a list of up to 20 devices that have connected with your phone. 䊳 Press / > Tools > Bluetooth > Device History.
4. If prompted, bond with the device. Your phone 3. Select a device or search for a device by selecting [Look for Devices]. connects to the device and transfers the contact. Sending Datebook Events 4. If prompted, bond with the device. Your phone connects to the device and transfers the file. 1. Press / > Tools > Datebook. 2. Highlight an event and press / > Send Via.... 䡲 For a repeating event, select This Event Only to send only this occurrence or Repeat Event to send all instances. 3.
Viewing and Storing Received Items After an incoming transfer is complete, your phone translates the item and it appears on the display. 䊳 To store an item, press Store (left softkey). 䊳 To discard an item without saving it, press Discard (right softkey). Bluetooth You can choose to either store or discard the item. Items are stored as follows: 䢇 Contact entries are stored to Contacts. 䢇 Pictures and audio files are stored to their folders and are accessible through the Media Center.
䢇 13. Multimedia 䢇 䢇 䢇 ⽧ Media Center (page 138) ⽧ My Music (page 142) ⽧ My Images (page 150) ⽧ My Videos (page 151) Media Center The Media Center provides convenient access to all supported multimedia files on your device or your memory card. Note: The Media Center cannot read the Music and Podcast folder from the microSD card. Voice records created when your phone was not in a call. Musical ringtones in the list of ringtones. Audio files saved from MMS messages.
䊳 Press / > Multimedia > Media Center > / > Filter and select a filtering option: Phone: All, Phone: Pictures, Phone: Audio, Phone: Video, Card: All, Card: Pictures, Card: Audio, or Card: Video Keeping the Last Filter Setting You can set the Media Center to show all items every time you access it or to keep the filtering setting you had when you last viewed it. 䊳 Press / > Multimedia > Media Center > / > Setup > Remember Filter > On.
When an item is locked, it cannot be deleted from the Media Center. See “Locking Items” on page 140. Locking an item has no effect on its forward locking. DRM Items Except for Java applications, which download to Java Apps, the default location for any DRM items that you download is the Media Center. Depending on how a vendor has set rights for an item, the item may include the following status icons. k The item is a DRM item. l The DRM item has expired. All DRM items are forward locked.
Pictures You can delete all unlocked items currently in view, depending on how Media Center filtering is set. See “Filtering by Media Type” on page 139. If filtering is set to show all types of Media Center items, all unlocked items are deleted. The Media Center lets you view pictures and send them in MMS messages, with Nextel Direct Send, or with Bluetooth. You can also assign them to Contacts entries or set them as your phone’s wallpaper. 1. Press / > Multimedia > Media Center. 2.
2. Create and send the message. (See “Creating and Sending Messages” on page 50.) The picture you selected is automatically attached. Setting Pictures as Wallpaper 䊳 Highlight or select a picture and press / > Set As Wallpaper. Sending Pictures With Direct Send 1. Highlight or select a picture and press / > My Music Send Via... > Direct Send. 2. Select A Contact or A Recent Call and select an available recipient. 3. Press the DC button to send the picture.
䢇 music. 3. Press r to play music. Exiting My Music 䊳 To exit My Music, press Exit (right softkey). (If Exit is not an option, press Back [right softkey] until it is.) How Audio Files Are Organized My Music groups audio files on the memory card into folders and lists. Unless the phone determines a file is a podcast, it treats all audio files as songs.
Tip: The Songs folder contains all the audio files, except podcasts, on the memory card in a single list. To quickly navigate through lists, enter the first letter of a file or folder to skip to the entries beginning with that letter. Pause and Resume 䊳 To pause a playing audio file, press Pause (left softkey). 䊳 To resume playing a paused audio file, press Play (left softkey). 3. To play the first audio file in the folder, press Play (left softkey).
䡲 One to repeat the current song. Your phone can continue to play music in the background while you are accessing other features. 䡲 Off to turn repeat off. To play music in the background: 䊳 With music playing, press / > Hide Player. The music player continues playing and the display returns to standby mode. To return to the music player, press Music (right softkey).
Working With Playlists Editing a Playlist Playlists let you group audio files that you’d like to hear together. Adding or removing songs from playlists, or deleting entire playlists, does not copy, move, or delete files from your memory card. After you have created a playlist, you can change its name, add audio files, remove audio files, and change the order of the audio files. Creating a Playlist 1. Press / > Multimedia > My Music > Playlists > [Create New] > Name. 2. Enter a name and press r.
You can remove some or all audio files from a playlist. To remove a file from a playlist: 1. Before you have saved a new playlist or while editing a playlist, press /. 2. Highlight an audio file and press / > Remove Song. 3. Press Save (left softkey). To remove all files from a playlist: 1. Before you have saved a new playlist or while editing a playlist, press / > Remove All Songs. 2. Press r or Yes (left softkey) to confirm. 3. Add new songs to the playlist and then press Save (left softkey).
To add any audio file to Favorites: 1. Press / > Multimedia > My Music > Songs. Deleting Audio Files Podcasts You can delete audio files from the memory card one at a time, by album, by artist, or by genre, or by deleting everything in the Songs, Albums, Artists, or Genres folders. To access and play podcasts: Deleting an Audio File 2. Highlight a file and press / > Add to Favorites. 1. Press / > Multimedia > My Music > Podcasts. 1. Press / > Multimedia > My Music. 2.
Deleting everything in the Songs, Albums, Artists, or Genres folder deletes all audio files from the memory card. 1. Press / > Multimedia > My Music > Songs, Albums, Artists, or Genres. 2. Press / > Delete Songs > / > All. 3. Press r or Yes (left softkey) to confirm. Deleting All Podcasts 1. Press / > Multimedia > My Music > Podcasts > / > Delete Podcasts. 2. Press r or Yes (left softkey) to confirm. Setting Audio and Visual Options You can customize the sound of My Music by setting the equalizer.
My Images 䢇 The My Images application lets you easily browse, edit and view a slideshow of images on your phone or memory card on your internal display, or browse, view a slideshow on the external display. 䢇 My Images Menu 䢇 The My Images menu has many image management features. The following options are available for existing images by pressing / > Multimedia > My Images > /.
My Images has several options for editing your photos including: Crop, Rotate/Flip, Color Adjustments, Resize, Borders, Stamps, Text, and Text Bubble. 䊳 Viewing Videos 䊳 Press / > Multimedia > My Images > / > Edit and follow the prompts to edit the picture. My Videos The My Videos application lets you easily browse and view video files on your phone or memory card. 䊳 Press / > Multimedia > My Videos or press / > Games and Apps > My Videos.
Safety and Warranty Information
S1.
Note: For the best care of your phone, only authorized personnel should service your phone and accessories. Failure to do so may be dangerous and void your warranty. Tip: Purchase an optional hands-free accessory at your local Sprint Store, or call Nextel at 1-866-866-7509. Do Not Rely on Your Phone for Emergency Calls Mobile phones operate using radio signals, which cannot guarantee connection in all conditions. Therefore you should never rely solely upon any mobile phone for essential communication (e.
Operational Precautions Note: Always turn off the phone in healthcare facilities, and request permission before using the phone near medical equipment. To assure optimal radio product performance and to be sure that human exposure to RF does not exceed the guidelines set forth in the relevant standards, always follow these instructions and precautions: Phone Operation When placing or receiving a phone call, hold your radio product as you would a wireline telephone. Speak directly into the microphone.
Turning Off Your Phone in Dangerous Areas 䢇 To avoid interfering with blasting operations, turn your phone off when in a blasting area or in other areas with signs indicating two-way radios should be turned off. Construction crews often use remote-control RF devices to set off explosives. 䢇 Turn your phone off when you’re in any area that has a potentially explosive atmosphere. Although it’s rare, your phone and accessories could generate sparks.
awareness, involuntary movements, or disorientation. It is always a good idea to hold the screen away from your eyes, leave the lights on in the room, take a 15-minute break every hour, and stop use if you are very tired. Caution About High Volume Usage WARNING: Exposure to loud noise from any source for extended periods of time may affect your hearing. The louder the volume sound level, the less time is required before your hearing could be affected.
Don’t place your battery near a heat source. Excessive heat can damage the phone or the battery. High temperatures can cause the battery to swell, leak, or malfunction. Therefore: 䡲 Do not dry a wet or damp battery with an appliance or heat source, such as a hair dryer or microwave oven. 䡲 Avoid leaving your phone in your car in high temperatures. DOs 䢇 䢇 Do avoid dropping the battery or phone. Dropping these items, especially on a hard surface, can potentially cause damage.
Disposal of Lithium Ion (LiIon) Batteries: Promptly dispose of used batteries in accordance with local regulations. Contact your local recycling center or national recycling organizations for more information on how to dispose of batteries. Do not handle a damaged or leaking Li-Ion battery as you can be burned. WARNING: Never dispose of batteries in a fire because they may explode. Special Note: Be sure to dispose of your battery properly.
Don’t store the battery in high temperature areas for long periods of time. It’s best to follow these storage rules: Less than one month: -4° F to 140° F (-20° C to 60° C) More than one month: -4° F to 113° F (-20° C to 45° C) Batteries and Chargers Your battery, charger, or portable radio may contain symbols, defined as follows: Symbol 032374o 032376o 032375o Definition Important safety information follows. Do not dispose of your battery or phone in a fire.
Ratings have been developed for mobile phones to assist hearing device users find phones that may be compatible with their hearing device. Not all phones have been rated for compatibility with hearing devices. Phones that have been rated have a label with the rating(s) located on the box, and are listed at www.motorola.com/accessibility. These ratings are not guarantees. Results will vary depending on the user’s hearing device and individual type and degree of hearing loss.
or Java Timer. 2. Highlight the minimum time interval setting and press r. 䢇 䢇 Position the phone so the internal antenna is farthest from your hearing aid. Move the phone around to find the point with least interference. Caring for the Environment by Recycling This symbol on a Motorola product means the product should not be disposed of with household waste.
Perchlorate Material – special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate. There is no special handling required by consumers. Product Operation Radio Frequency (RF) Energy If you wear the mobile device on your body, always place the mobile device in a Motorola-supplied or approved clip, holder, holster, case, or body harness.
If your mobile device offers an airplane mode or similar feature, consult airline staff about using it in flight. Implantable Medical Devices If you have an implantable medical device, such as a pacemaker or defibrillator, consult your physician before using this mobile device. Additionally, the use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.
human exposure to RF signals. More than 120 scientists, engineers and physicians from universities, government health agencies and industries developed this updated standard after reviewing the available body of research. In 1993, the Federal Communications Commission (FCC) adopted this updated standard in a regulation.
Your MOTOROLA BRUTE wireless phone meets the governmental requirements for exposure to radio waves. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured to not exceed limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. Government and by the Canadian regulatory authorities. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
Owner’s Record Patent and Trademark Information The model number, regulatory number, and serial number are located on a nameplate inside the battery compartment. Record the serial number in the space provided below. This will be helpful if you need to contact us about your phone in the future. MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg. U.S. Pat. & Tm. Off. ©2009 Motorola, Inc. All rights reserved.
The Motorola products described in this manual may include copyrighted Motorola and third party software stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software.
Privacy and Data Security Motorola understands that privacy and data security are important to everyone. Because some features of your phone may affect your privacy or data security, please follow these recommendations to enhance protection of your information: 䢇 Monitor access: Keep your phone with you and do not leave it where others may have unmonitored access. Lock your device’s keypad where this feature is available.
䢇 䢇 䢇 䢇 䢇 Position your phone within easy reach. Be able to access your phone without removing your eyes from the road. If you receive an incoming call at an inconvenient time, if possible, let your voice mail answer it for you. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous. Do not take notes or look up phone numbers while driving.
S2. Manufacturer’s Warranty Motorola Limited Warranty for the United States and Canada What does this Warranty Cover? ⽧ Motorola Limited Warranty for the United States and Canada (page 172) ⽧ Service and Repairs (page 176) Your phone has been designed to provide you with reliable, worry-free service. If for any reason you have a problem with your equipment, please refer to the manufacturer’s warranty in this section.
Products Covered Length of Coverage Products and Accessories as defined above, unless otherwise provided for below. One (1) year from the date of purchase by the first consumer purchaser of the product unless otherwise provided for below. Decorative Accessories and Cases. Decorative covers, bezels, PhoneWrap™ covers and cases. Limited lifetime warranty for the lifetime of ownership by the first consumer purchaser of the product. Monaural Headsets.
subjecting the Products to conditions beyond their stated specification or limits; (c) use of the Products for commercial rental purposes; or (d) external causes or acts which are not the fault of Motorola, including but not limited to flood, fire, earthquake, tornado or other acts of God, are excluded from coverage. Use of Non-Motorola Products and Accessories.
Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products, Accessories or Software that does not conform to this warranty. We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products, Accessories or parts. No data, software or applications added to your Product, Accessory or Software, including but not limited to personal contacts, games and ringer tones, will be reinstalled.
Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another.
A Accessories 20 Charger 20 Li-Ion Battery 20 Activation 2 Airplane Mode 77 Answering Calls 22 Applications See also Java Applications Attachments 57 See also MMS Messages Audio Files Fast Forward and Rewind 144 Inserting in Messages 55 Pause 144 Playing 143 Resume 144 See also Voice Records Skip 144 Volume 144 B Backlight 73 Battery 9–11 Charging 11 Disposal 160 Installing 10 Safety 158 Bluetooth 132–137 Deleting Received Items 137 Receiving Items 136 Sending Contacts 135 Transfers, Canceling 136 Viewing
From Contacts 29 Group Connect 30 International 64 Phone Call While in Direct Connect 27 Phone Calls 22 Talkgroup Calls 39 Using the Member ID 29 Voice Name 27, 30 Camcorder See Video Camera 126–128 Camera Setup 128 Exposure Control 127 GPS Tag 127, 128 Options 127 Self Timer 127 Style 127 Talking Pictures 126 White Balance 127 Zoom 128 Carousel 84 Clock Display 74 178 Index Contacts 97–103 Adding an Entry 98 Assign a Picture to an Entry 103 Creating 98 Deleting 102 Editing Entries 101 Making Direct Conne
E Email 66 Emergency Numbers 23 End-of-Call Options 25 Entering Text 16–19 Alpha Mode 17 Numbers 18 Quick Notes 18 Selecting Mode 16 Word Text Input 16 Creating Groups 31 Deleting 32 Groups vs.
J Java Applications 110–111 Deleting 111 Downloading 111 Downloading Games 68 Ending Applications 110 Installing Applications 110 Memory 112 Privacy 88 Resuming Applications 110 Running Applications 110 Suspending Applications 110 K Key Functions 6 L Language 85 Lock Code Changing 91 Locking Your Keypad 91 Locking Your Phone 90 M Making Calls 22 180 Index Media Center 138 Deleting 140 Forward Locked 139 Locking Items 140 Memory 141 Pictures 141 Renaming Items 140 Viewing 138 Memo 117 Calling From 118 Edit
My Music Accessing 142 Deleting Files 148 Equalizer 149 Folders and Lists 143 Playlists 146 Repeat 145 Visuals 149 N Nextel Direct Send See Direct Send Nextel Direct Talk See Direct Talk Nextel Service Account Passwords 3 Activation 2 Operator Services 4 Non-Emergency Numbers 64 Notepad See Memo O One Touch Direct Connect 78 Outbox 56 Owner’s Record 168 P Pauses 26 Storing 100 Phone Connecting to Computer 125 Phone (illus.
Pictures 141 Inserting in Messages 54, 141 Saving From Messages 59 Playlist 146 Creating 146 Editing 146 Favorites 147 Reordering 146 Podcasts 148 Prepend Dialing 85 Profiles 78 Call Filtering 81 Creating 80 Deleting 80 Editing 80 Switching 79 Temporary 79 Viewing 78 PTT Options 88 Push To Talk 88 182 Index Q S Quick Notes 54 R Radio Frequency 164 Recent Calls 92–95 Call Alerts 93 Deleting Recent Calls List 95 My Info 93 Prepending a Number 96 Saving a Number 95 Remote Direct Connect Button 20 Resettin
V Talkgroups 39 Join 40 Settings 88 TDD/TTY Devices 64 Telecommunications Relay Service 64 Text Entry 16–19 Database 17 Mode 16 Text Messaging See MMS Messages Three-Way Calling 61 Transmitters Turning On and Off 77 TTY Devices 64 Turning Your Phone On and Off 12 U Unlocking Your Keypad 91 Unlocking Your Phone 91 Vibrate All 71 Video 128 My Videos 151 Options 129 Recording 128 Settings 129 Viewing 151 Voice Name 27, 30 Creating 99 Voice Records Creating 118 Deleting 119 Inserting in Messages 55 Labelling
