Installation guide

Quick Installation Guide 5

A. Connect the SBG1000 to Your Cable TV System

You may need to call your cable provider to activate your high-speed Internet

service. Your cable provider may require the MAC address labeled CM HFC

MAC ID on the bottom of the SBG1000. Please write your CM HFC MAC ID

here:

00 : ______ : ______ : ______ : ______ : ______

Connecting Directly to the Cable Outlet

1 Connect one end of the coaxial cable to the cable TV wall outlet and its

other end to the cable port on the SBG1000.

2 Plug the AC power cord into the power connector on the SBG1000.

3 Plug the AC power cord into an AC wall outlet or surge protector.

RESET

5 4