Operating instructions

Overview 2
22
2-
--
-11
1111
11
BLE*/* Installation and Operation Manual
Model Description Function
FTEC
Fast Transfer Electronic Crowbar This option is used for overvoltage protection and replaces the
existing surge protector.
LL-BLE-HMS
Status monitor module This module enables monitoring of the unit’s operating parameters
by the LIFELINE status-monitoring system. This accessory also
requires the deep housing cover.
BLE,
cover/status
monitor
Deep housing cover This optional cover is required to contain the LIFELINE status
monitor module.
RCB87
Response Correction Board This optional board compensates for system roll-off at 870 MHz.
The BLE*/* is shipped with a jumper in this location which you
can replace when additional response correction is required.
JXP-RPC
Return Path Correction board This optional board provides additional flatness response
correction in the return path for systems that must meet especially
stringent return path flatness requirements.
ICS
Ingress Control Switch This option enables remote monitoring, isolation, and reduction of
ingress on the return path by providing signal attenuation of 6 dB
or cutoff of 38 dB typical. The unit is shipped with a jumper in this
location.