user manual

6-50 Computer Group Literature Center Web Site

Subassembly Reference

Secondary (Rear) Side I/O Connectors

Note I/O slot connectors P4, P2, and P1 do not connect through to the

transition module.

Secondary (Rear) Side CPU Transition Module

Connectors

The CPU transition module connectors use the same pinouts as the

connectors in the CPX8216 standard backplane.

Note CPU connectors P4, P2, and P1 do not pass through the

backplane.

Table 6-39. P5 Connector, I/O Slots 1-6 and 11-16 (User

I/O)

POS Row Z Row A Row B Row C Row D Row E Row F

22-1 GND I/O I/O I/O I/O I/O GND

All I/O pins pass through the backplane to the transition module, they do not

make any connection to the backplane.

Table 6-40. P3 Connector, I/O Slots 1-6 and 11-16 (User

I/O)

POS Row Z Row A Row B Row C Row D Row E Row F

19-1 GND I/O I/O I/O I/O I/O GND

All I/O pins pass through the backplane to the transition module, they do not

make any connection to the backplane.

For Pinout Information

for Connector: See:

P5 Table 6-24 on page 6-27

P3 Table 6-25 on page 6-28