user manual

CPU Transition Module Connectors (Transition Slots 7 and 9)
http://www.motorola.com/computer/literature 6-27
6
CPU Transition Module Connectors
(Transition Slots 7 and 9)
Note CPU transition module connectors P4, P2, and P1 are not
connected.
Table 6-24. P5 Connector, CPU Transition Module Slots
POS
Row
Z Row A Row B Row C Row D Row E
Row
F
22 GND I/O I/O I/O I/O I/O GND
21 GND I/O I/O I/O I/O I/O GND
20 GND I/O I/O I/O I/O I/O GND
19 GND I/O I/O I/O I/O I/O GND
18 GND I/O I/O I/O I/O I/O GND
17 GND I/O I/O I/O I/O I/O GND
16 GND I/O I/O I/O I/O I/O GND
15 GND I/O I/O I/O I/O I/O GND
14 GND I/O I/O I/O I/O I/O GND
13 GND I/O I/O I/O I/O I/O GND
12 GND I/O I/O I/O I/O I/O GND
11 GND I/O I/O I/O I/O I/O GND
10 GND
RSVD RSVD RSVD RSVD RSVD GND
9 GND
RSVD RSVD RSVD RSVD RSVD GND
8 GND
RSVD RSVD RSVD RSVD RSVD GND
7 GND RSVD RSVD RSVD RSVD
RSVD GND
All I/O pins pass through the backplane; they do not make any connection to the
backplane.
All RSVD pins are internally connected and pass through. They are reserved for
the IDE and Floppy drive signals; the transition module should avoid
connections to these pins.