User guide
30
Connections – Subscribe to HD
6
Press the arrow buttons to check the option that best describes
your television:
• 4:3 standard definition
• Widescreen standard definition
• 720p on HD screens
• 1080i on HD screens
7
Press the arrow buttons to highlight Continue and press OK. The FibreOP
TV PVR or receiver attempts to detect your television screen size and
other information.
If your television is capable of switching to the option you chose, a message
appears confirming that the change has been made.
If the PVR or receiver needs more information about your television, the
Aspect ratio and high definition (Step 1) screen appears. This screen allows you
to test the new setting on your screen for 15 seconds to make sure it works.
Highlight Start test and press OK. The Aspect ratio and high definition (Step 2)
screen appears.
8
If the picture is the correct size, highlight Keep setting and press OK. A
confirmation message appears before returning to live TV.
If you see a black screen or the picture is not the correct size, wait 15 seconds
for the test to end. The Aspect ratio and high definition (Step 3) screen
appears. Highlight I saw a black screen. Choose another setting. Press OK. The
Screen aspect ratio and high definition screen reappears. Repeat steps 6 to 8
until you find the setting that works best with your television.
HD televisions usually display best in 1080i or 720p. Check the manual
for your TV for more information.
Settings
10:05 PM
Screen aspect ratio and high denition
Continue
Cancel changes
Choose the aspect ratio and resolution for your TV, then shoose Continue.
4:3 standard denition
Widescreen standard denition
720p on high-denition screens
1080i on high-denition screens
Settings
10:06 PM
Aspect ration and high denition (Step 1)
Your TV may not be able to display 1080i on high-denition screens. To verify if this is the correct
setting for your TV, choose Start test. If you don’t see anything during the test, wait 15 seconds and
then choose another setting.
Start test
Cancel changes